Windows 7: Stuck on failure configuring windows updates reverting changes

I came across this issue yesterday after downloading and installing several updates to a laptop that had never got any updates since Windows 7 was setup. It was I think more that 130 important and optional updates. As soon as installed the updates, it automatically restarted the laptop and causes this looping issue of "failure configuring windows updates reverting changes". In a simple word, it was stuck on that screen.

I tried every possible steps from restarting the machine even it says "do not turn off your computer" to booting to Safemode. But here's what I did to solve this issue:

1. Restart your PC/laptop
2. Keep tapping F8 as soon as see the initialization screen
3. Choose Safemode
4. Once Safemode is fully loaded, hit Start>type cmd
5. Right click on cmd and chose Run as Administrator
6. On the Command Prompt screen type sfc /scannow
7. When its done, type chkdsk /f/r
8. Restart the PC/laptop and boot to Windows as normal

Read More

Step by Step How to Used SPI Program Flasher

This tutorial for Wimax BM622i modem you need a know how in hex and electronics, you need also a hot air tools. Change MAC using LPT Flasher and dump files and SPI Program, There are humor that Bm622i is similar to xbox 360.

1. Be sure na connected yung programmer sa voltage source 9-12VDC at least 500mA.

2. Connect your LPT/PRINTER cable sa socket ng programmer. DO NO USED USB-LPT CONVERTER! It will NOT work!

3. Run the software and SELECT your LPT Port.

4. After selecting the port kung saan nakakabit yung programmer, TEST HARDWARE nyo po. Dapat DETECTED yung programmer nyo.

5. Once na detected na yung programmer, CALIBRATE nyo na.

6. Now we are ready for programming...

Sundan nyo na lang po sumusunod na images panu mag program at mag save ng DUMPS.

USED HEX WORK STATION TO EDIT DUMP FILE FIND YOUR MAC THEN EDIT

After Verify Device you done..

How To Put MAC? On your HEX Editor Find a MAC with COLON :

ang orig na mac ay 40:4d:8e:6c:1b:da

kahit 40:4d:8e lang i type mo sa search ok na

ang na search naman natin ay 40:4d:8e:6c:1b:d9 ( minus 1 kasi )

pwede mo na i edit o palitan ang mac.....

kung ang working na mac na ilalagay mo ay

40:4d:8e:6c:1c:88

ang ilagay mo ay

40:4d:8e:6c:1c:87

sa mga nalilito mag minus lalo na sa letters ito ang guide

• for wan mac, don ka sa offset 0008000C or 0007FFFF at yung text ang e-edit muh, minus 1 ka sa last digit ng mac..
• for lan mac, don ka sa offset ec0066 at yung hex ang e-edit muh, plus 1 ka sa last digit..

O ayan MALIWANAG PA sa sikat ng araw {makers}

MISLEADING
search mo ay NAI... yan yung may @globelines.com.ph.... hindi yan ang mac address

may colon dapat ang mac address na dapat mong i edit

Download Program: SPI FLASH Programmer
Download Hex Editot HEX Workstation
Download RBT USB TV-DVD_EEPROM_

Read More

How to enable telnet on Windows 7

This simple and easy graphical snapshot will guide you on how to enable telnet on Windows 7, all you have to do is follow the screenshots.

From here you may type the command "cmd" and press enter without the " " to able to go the command line interface, after type the command it will prompt you a window box for the command line.

After the prompt of the command line interface you can now check if the telnet is working, just type telnet and press enter.

Read More