ZyXEL HES-319M2W

Ultimate WiMAX MIMO Technology for Outdoor Application

The ZyXEL HES-319M2W a.k.a. Linkem HES-319M2W, but please don't be confused to its original hardware manufacturer the Huawei Technologies. The Huawei model HES-319 and HES-319M2W on other country ISP is being loaded with ZyXEL operating system or. and by Linkem.

Benefits

Built-In High-Gain MIMO Antenna in the Outdoor Unit

The HES-319M2W Outdoor CPE provides integrated antenna (The CROSS- Polarization 14dBi) for easy installation and high performance in different environments. The MIMO technology will increase the coverage, bandwidth and reduce the edge corner which cannot get the better sensitivity. Tx Diversity is supported.

credits image

High Transmission Power with Low Power Consumption

The HES-319M2W supports the maximum transmission power on nominal 26 ± 1dBm at room temperature. This enable network operator to easily extend its radio network coverage.

credits image

Ultimate Broadband Wireless Technology

MIMO products support state-of-the-art Matrix A and Matrix B modes.

Software Upgrade over the Air

Through the WiMAX radio interface, the HES-319M2W Outdoor CPE supports TR-069 or OMA-DM fully configurable and software upgradeable through events triggered by the operators.

VoIP embedded in Outdoor Unit

The HES-319M2W Outdoor Unit supports two SIP (RFC3261)-based VoIP. It will be cost effective and price performance design concept. As for Indoor unit, it just simply provides power via PoE Ethernet Cable.

WiFi 11b/g/n and Ethernet

The HES-319M2W supports one WiFi (11 b/g/n) with two Ethernet RJ45 ports.

Advanced IP Networking Features

The HES-319M2W Outdoor CPE supports advanced IP networking functionalities, including all Secure NAT Router features needed to access the Internet safely.

Easy-to-Install Multi-User Solution

The HES-319M2W comprises an integrated antenna. The LED bars as well as buzzer showing the WiMAX radio signal strength can be used

Specifications

WiMAX Air Interface	Reference standard: IEEE 802.16e-2005 SOFDMA Duplex mode: TDD Frequency: 3,400-3,600GHz Channel Bandwidth / FFT size: 5MHz / 512FFT, 7MHz/ 1024FFT, and 10MHz/1024FFT Modulation: QPSK, 16QAM, 64QAM(DL Only) Matrix A & Matrix B support Sensitivity: -96dBm @ QPSK 1/2 Antenna: 14 dBi MIMO CROSS- Polarization Aggregate throughput Up to 20 Mbps QoS management based on classification: BE, UGS, rtVR, nrtVR, ertVR Security: PKMv2, EAP-TLS, EAP-TTLS/CHAP/PAP/MSCHAP/MSCHAPv2, CMAC message authentication, CCM mode 128-bit AES data ciphering Idle mode, Sleep mode, Hand Over, BS-initiated scanning and reporting.
ND&S*2	Auto selection User selection
Wi-Fi Air Interface	Reference standard: IEEE802.11b/g/n Transmit Output Power: o 802.11b: 16 dBm +/-2.0 dBm o 802.11g: 14 dBm +/-2.0 dBm o 802.11n: 13 dBm +/-2.0 dBm Receiver Sensitivity: o 802.11b: -86dBm @ Typical o 802.11g: -71dBm @ Typical o 802.11n: -65dBm @ Typical
IP Networking	Support IPv4 Static IP, DHCP client/server/relay DNS relay, DNS cache User configurable Router (RIPv1, RIPv2) and NAT (one-to-one, many-to-one) VPN Pass Through (PPTP & L2TP Pass-Through)
Voice over IP	SIP V2 (RFC 3261) and SDP (RFC 2327) G.711 a/u and G.729 codec Echo cancellation G.168 VAD (Voice Activity Detection), Silence suppression and CNG (Comfort Noise Generation) DTMF Detection and Generation Fax pass-through(T.38)
Phone Features	Caller ID and Message Waiting Indicator (MWI, RFC 3842) Call Waiting, Call Hold, Call Forward (Unconditional/Busy/No Answer) and Call transfer (Unattended and Attended Transfer) Early Media, Music on Hold
Management	Remote TFTP/HTTP Firmware Upgrade Web-based/SNMP/Telnet Management Over-The-Air firmware upgrade(OMA-DM,TR-069)
Hardware Specifications
Outdoor Unit	Provides Power over Ethernet via PoE ports (one for Ethernet, one for VoIP). Five Intelligence LEDs Reset to Factory Defaults The pole-mounting kits Rated for outdoor weather environment including ultraviolet sun radiation
Indoor Unit	Provides Power over Ethernet via PoE ports (one for Ethernet, one for VoIP) Two RJ-11 ports for VoIP Two RJ-45 ports for Ethernet 802.11b/g/n Wi-Fi interface LEDs: Power indication, WiMAX connection status, WiMAX Signal status, Wi-Fi connection status, VoIP status LED
Power Specification	External power supply: 48V DC Average power consumption at peak: 24 W
Physical Specifications
Outdoor Unit	Dimension: 255(W) x 254(D) x 58(H) mm Weight: 1071 g
Indoor Unit	Dimension:188(W) x 131(D) x 41(H) mm Weight: 284 g
Environmental Specifications
Outdoor Unit	Operation Temperature: -40oC ~ 60oC Operation Humidity: 10% ~ 90% (Non-condensing) Storage Temperature: -40oC ~ 65oC Storage Humidity: 10% ~ 95% (Non-condensing)
Indoor Unit	Operation Temperature: 0oC ~ 45oC Operation Humidity: 10% ~ 90% (Non-condensing) Storage Temperature: -40oC ~ 65oC Storage Humidity: 10% ~ 95% (Non-condensing)
Certification	CE certification marked for EMC and Safety Water Tightness: IEC529 / IP65

Read More

ZyXEL HES-319M2W MAC Changer How-To

ZyXEL HES-319M2W WiMAX MIMO MultiUser Outdoor CPE is just an HES-319M with added features such as (2 Voice + 2 Data + 1 WiFi).

First open any of your favorite browser e.g. Chrome, Firefox, IE, Safari or other that is not being mention, type http://192.168.1.1 on the address bar then input Username as admin while the Password is 1234 this will vary depends from your ISP customized firmware loaded to ZyXEL HES-319M2W. If you can not access using the username and password please consult you internet service provider (ISP) about it.

From the left side Menu, click Network Setting it will prompt you a Submenu then choose/ click WAN so that it will lead you to the setting as shown below screenshot.

From the screenshot above as you can see, you may input a valid/active MAC address on Clone MAC Address field and then click on Save to save the changes you have being made. The ZyXEL HES-319M2W WiMAX MIMO MultiUser outdoor CPE will then now restart with the new WAN MAC address. Download ZyXEL HES-319M2W WiMAX MIMO MultiUser Datasheet pdf here.

Read More

Huawei/ZyXEL HES-319M MAC Changer How-To

First open any of your favorite browser e.g. Chrome, Firefox, IE, Safari or other that is not being mention,  type http://192.168.1.1 on the address bar then input Username as admin while the Password is 1234 this will vary depends from your ISP customized firmware loaded to Huawe/ZyXEL HES-319M. If you can not access using the username and password please consult you internet service provider (ISP) about it.

Huawei would like to advise that you upgrade the product to a later version, so that we can continue to provide you with our best services. The version still supported by Huawei is as follows:

HES-319M(3.5G)、HES-309M(2.5G)、HES-339M(2.3G)、HES-319M2W(3.5G+WiFi)

Huawei hopes that this notice is helpful for you to plan your future networks. This announcement does not affect the existing service relationships. We are consistently dedicated to providing you with other excellent products and services. Any further questions, please contact your Huawei sales representative. - source

ZyXEL HES-319M Outdoor WIMAX CPE a rebrand from Huawei Techonolgies a.k.a. HES-319M, no wonder if you are searching for an article/datasheet and supports for this CPE device is not available on ZyXEL website neither on Huawei site because it is discontinued products.

From the left side Menu, click Network Setting it will prompt you a Submenu then choose/ click WAN so that it will lead you to the setting as shown below screenshot.

From the screenshot above as you can see, you may input a valid/active MAC address on Clone MAC Address field and then click on Save to save the changes you have being made. The Huawei / ZyXEL HES-319M outdoor WiMAX CPE will then now restart with the new WAN MAC address.

Updates:

This tricks is also applicable to Huawei HES-319M(3.5G)、HES-309M(2.5G)、HES-339M(2.3G)、HES-319M2W(3.5G+WiFi) outdoor WiMAX CPE including the identical rebrand ZyXEL HES-319M(3.5G), HES-309M(2.5G, HES-339M(2.3G), HES-319M2W(3.5G+WiFi) outdoor WiMAX CPE.

Read More