Huawei WiMAX Password Generator

Recently, Globe Telecom one of the major wireless ISP in the Philippines updated all their Huawei devices 4G WiMAX CPE remotely using TR069  that is connected to their network and this will enhance some features to the wireless modem especially firmware version V100R001PHLC08B025.

The delima with the new firmware 2011 updates is that the old tricks to locate the admin password for the subscriber to gain access to the advanced features on the CPE device such as Huawei BM622i will no longer co-exist.

This how-to is an alternative way to generate the admin password in order to login as admin account with the privilege unchanged of the 4G WiMAX CPE. Things you need are:

1. Download this file Huawei WiMAX BM622i password generator here
2. Extract the downloaded file using WINRAR, 7zip, or compatible .rar extractor
3. Open/Click this file 'ExcelAccess.exe' from the extracted folder.

You can check this previous post on how to get the MAC address on Globe Broadband 4G WiMAX Huawei Bm622i using default username and password.

4. Now you will have to get you MAC address under your Huawei BM622i modem (under the bar code you will see MAC: AA11BB22CC33) something like that.

5. Enter your MAC here

6. Click 'GENERATE' button to generate your admin password and will show something like this below

7. Now copy/paste that in your notepad (you can use ctrl-c & ctrl-v to copy paste), so you can remember easily.

8. On your web browser got to URL: http://192.168.254.1/globe and then enter username: admin and your generated password.

9. After a successful login, you will now be able to fully administer your BM622i 4G modem, and will be able to open other special tabs.

Hope this helps.... just leave a comment if you appreciate my post.

I got this from another forum site, and wanted to share my own experiment, and so I made my own procedures. Enjoy!

Read More

Globe Broadband Huawei BM622 admin Password

If you are a Globe Broadband 4G WiMAX wireless subscriber in the Philippines and being supplied by the Telco's ISP with the device Huawei Echolife model BM622 at the mile. Most probably you and I have same status with limited privilege to their CPE with user account provided as user only, then you are also in my same foot who wish to tweak this device for the purpose of taking the advantage of some features in it such as signal strength manipulation, firewall concerned, port forwarding and other stuff too.

Since the user account is only limited to those features and lack of advancement then we have to used admin privilege to do those stuff. But to be able to login the admin account we need of course the password and here's how to locate it, with this simple and easy steps it would be possible.

First, open any of your favorite web browser i.g. (Chrome, Firefox, IE, Opera, Safari, Seamonkey or others if not listed here) on the address bar type http://192.168.1.1 by default that is the IP address of the web graphical user interface (gui) of Huawei Echolife BM622. Likewise, to access the CPE device login with the default Username and Password as "user" refer to screenshot above.

Once you have already login, copy and paste or type http://192.168.1.1/html/management/account.asp on to the web browser you are working on, the result would be like the screenshot below.

To locate the admin password immediately you can press CTRL-F from the keyboard type admin as what is shown the above screenshot being encircled, this is just an example of an admin password 2008R6TxASRLVGZ2 highlight then press CTRL-C to copy. Logout, then login again using the admin with the password you have copied previously (from CTRL-C).

Congratulations, you are now able to access the admin account with full privilege you can now modify and edit the advanced features, setting and other stuff that you wanted to do.

Read More

Globe Broadband Huawei BM622i admin Password

How to login on Globe Broadband 4G WiMAX CPE Huawei BM622i latest updated firmware 2011 or the so called V100R001PHLC08B025. First open up any of your favorite browser, on the address bar type http://192.168.254.1 which is the default web graphical interface (gui) IP address of the Huawei BM622i device.

Before you can login to admin account/privilege you must be login using user account,  Username is user and the Password is 0SlO051O. To clarify the password it is Zero(0) - Captial(s) - small(L) - Capital(o) - Zero(0) - Five(5) - One(1) - Capital(o). You can check this previous post on how to login on Globe Broadband 4G WiMAX Huawei Bm622i using default username and password.

Once you are able to login using user account with the default username and password, look for WAN MAC address an example is on screenshot above F4:C7:14:6B:F3:D1. Copy the twelve (12) digit hexadecimal WAN MAC address except/remove the semi-colon e.g. F4C7146BF3D1, now open your Huawei wififree.exe password generator paste the twelve (12) digit hexadecimal WAN MAC address e.g. F4C7146BF3D1 then click generate the result will be your admin password.

Here's the link on how to generate 4G WiMAX Huawei devices password using Huawei WiMAX password generator.

Read More

Huawei Echolife BM622m Overview

Product Description

The HUAWEI BM622m EchoLife 4G WiMAX CPE  is one of next new generation gateway to work for 4G WiMAX network. It has some difference from HUAWEI BM622i and BM622, and supports up to 20Mbps downlink and 5Mbps uplink on WiMAX network.

Specifications:

• IEEE 802. 16e-205 Wimax Air Interface
• 2.496–2.69 GHz / 2.5Ghz (Huawei BM622m)
• Built-in Smart Antenna Array
• 802.16e Security for Authentication and Ciphering
• Supports MIMO 2R x 2Tx
• Supports WEB UI Configuration Tool
• Qos Management
• Local and Remote Control and SW Upgrade Capabilites
• Device Management Based on TR-069/OMA-DM (Optional)

HUAWEI BM622m Quick Start (V100R001_01) 2012-09-04|708KB

Read More

Huawei BM622i Change MAC via Upgrade Telnet

Here's another trick to change the MAC Address of your Huawei BM622i 4G WiMAX CPE wireless broadband modem using BM622i V100R001PHLC08B029PST03.exe dis-upgrading the firmware 2011 via telnet command line interface (cli).

First you have to download here the Globe WiMAX 4G wireless broadband CPE modem upgrade utility filename for Huawei BM622i V100R001PHLC08B029PST03.EXE and run it, as you can see the screenshot above.

Just leave it open as it on the screenshot above, open up telnet client if you have Putty utility much better input 192.168.254.1 at port 23 and click open.. But if you don't have on your Windows 7 you must enable it on Control Panel  then Program and Features where telnet is located. Windows XP telnet client is enable by default just Click Start => Run then type telnet 192.168.254.1 command hit enter it will prompt you a window lead to command line interface.

You may now login using the simple steps below:

LOGIN: Firefly

PASSWORD: $P4mb1h1r4N4m4nT0!!

Then press enter

ATP>xiugai macdizhi XX:XX:XX:XX:XX:XX
ATP>diag restore default

Wait, now the Huawei BM622i WiMAX 4G Wireless broadband CPE modem will reboot. Open any your favorite browser on address bar type http://192.168.254.1 with the username and password user, use Huawei WiMAX password generator to generate the admin password to be able to login as admin privilege account.

Congratulation, you may now able to change your Huawei BM622i WiMAX 4G CPE wireless broadband modem.

Read More

BM622i Change MAC via Telnet 2011 Firmware

This tutorial is how to change MAC Address on Huawei BM622i WiMAX CPE 4G wireless broadband modem firmware 2011 aka V100R001PHLC08B025. To do this is you must have a telnet client, if you are using Windows 7 you must enable it first on your Control Panel => Programs and features. On Windows XP telnet client is enable by default or you can use Putty if you do not have one it is also a telnet client.

If your prefer to used Windows telnet client  you can click Start => Run, then type cmd a command to open Windows command line interface (CLI) then just press enter will prompt you a window. Type telnet 192.168.254.1 be sure your in the same subnet IP address range. On the other hand, you can also use Putty utility a graphical interface (GUI) telnet client just input 192.168.254.1 on port 23 and it will open a window telnet.

Here's the few steps on how to do the stuff via telnet command line interface:

—————————————
——–Welcome to ATP Cli——
—————————————
Login: wimax
Password:wimax820
ATP>diag set macaddr XX:XX:XX:XX:XX:XX

set Lan mac address success
Lan mac address updated XX:XX:XX:XX:XX:XX
set Lan Mac address Sucess
Wan mac address updated XX:XX:XX:XX:XX:XX

ATP>diag reboot

Wait, Huawei BM622i will reboot.

Then after the Huawei BM622i WiMAX CPE 4G broadband modem reboots, open any browser type http://192.168.254.1 login with the Username and Password "user", used password generator to generate an admin password for the MAC you used and log in as admin on Huawei BM22i.

On the left side menu clicked or go to WiMAX => Security
You must change the NAI with your MAC Address "XXXXXXXXXXXX@globelines.com.ph"

Changing the Username and Password is a must with the admin password you have generated from your generator and then click apply to save the changes. If it works for me then absolutely it will also works for you.

Congratulation and enjoy!

Read More

Huawei BM622 downgrade firmware 2010 via tftp

First of all is we have to make it sure that we are able to access or connect the Huawei BM622  4G WiMAX wireless broadband modem CPE by verifying through pinging the IP address 192.168.1.1 via CLI (command line interface) or thru web GUI (graphical user interface) on browser with same IP address at http://192.168.1.1 to make it realistic as show below snap shot.

Whether or not the Huawei BM622  4G WiMAX wireless broadband modem CPE enable/disable its DHCP server we have also to verify our PC if we are using Dynamic or Static IP address to anticipate if the CPE device reboots failed to provide IP address or the PC itself can not acquire its IP address.

Static IP address is more preferable during TFTP firmware uploading operation to make it sure we are in the same IP address subnet and our PC is still connected even if the CPE device fail its DHCP server during power on.

To start with, the PC must be ON with the Static IP address above mention. Power off the CPE device Huawei BM622, unplug the AC/DC adapter then plug it again and remain the power is OFF.

1. Click START and RUN, then type cmd to open windows CLI (command line interface) mode
2. Type cd\ to change directory i.g. C:\
3. Make sure your bm622firmware2010.bin is in local drive C:\
4. Type tftp –i 192.168.1.1 put bm622firmware2010.bin as you can see from the screenshot below, wait DO NOT press enter yet until to do so.

5. Make sure or double check that the LAN cable is physically connected to the PC and to the CPE device Huawei BM622 port.
6. Using a pin or sharp item insert onto the pin hole and press the “Reset” button at the side of the CPE device Huawei BM622 as shown below snapshot.

7. Press the Power ON button of the Huawei BM622 while still pressing the "Reset" button.
8. Release the “Reset” button of the Huawei BM622 and press Enter to begin the TFTP firmware downgrade/upgrade.
9. Please wait for 1 (one) minute and reboot the modem.
10. Press “Reset” while BM622 is ON.
11. Open your browser type http://192.168.1.1 to verify or check if your firmware is already being uploaded, just do same procedure if it is unsuccessful. This tutorial is if you want to downgrade or upgrade your BM622 firmware via TFTP, this can be also applied to 4G WiMAX CPE Huawei model BM621, BM622i, BM625, and BM626.

Read More

Huawei BM622 TFTP Firmware Upload

First of all is we have to make it sure that we are able to access or connect the Huawei BM622  4G WiMAX wireless broadband modem CPE by verifying through pinging the IP address 192.168.1.1 via CLI (command line interface) or thru web GUI (graphical user interface) on browser with same IP address at http://192.168.1.1 to make it realistic as show below snap shot.

Whether or not the Huawei BM622  4G WiMAX wireless broadband modem CPE enable/disable its DHCP server we have also to verify our PC if we are using Dynamic or Static IP address to anticipate if the CPE device reboots failed to provide IP address or the PC itself can not acquire its IP address.

Static IP address is more preferable during TFTP firmware uploading operation to make it sure we are in the same IP address subnet and our PC is still connected even if the CPE device fail its DHCP server during power on.

To start with, the PC must be ON with the Static IP address above mention. Power off the CPE device Huawei BM622, unplug the AC/DC adapter then plug it again and remain the power is OFF.

1. Click START and RUN, then type cmd to open windows CLI (command line interface) mode
2. Type cd\ to change directory i.g. C:\
3. Make sure your bm622firmware2010.bin is in local drive C:\
4. Type tftp –i 192.168.1.1 put bm622firmware.bin as you can see from the screenshot below, wait DO NOT press enter yet until to do so.

5. Make sure or double check that the  LAN cable is physically connected to the PC and to the CPE device Huawei BM622 port.
6. Using a pin or sharp item insert onto the pin hole and press the “Reset” button at the side of the CPE device Huawei BM622 as shown below snapshot.

7. Press the Power ON button of the Huawei BM622 while still pressing the "Reset" button.
8. Release the “Reset” button of the Huawei BM622 and press Enter to begin the TFTP firmware upload.
9. Please wait for 1 (one) minute and reboot the modem.
10. Press “Reset” while BM622 is ON.
11. Open your browser type http://192.168.1.1 to verify or check if your firmware is already being uploaded, just do same procedure if it is unsuccessful. This tutorial is if you want to downgrade or upgrade your BM622 firmware via TFTP, this can be also applied to 4G WiMAX CPE Huawei model BM621, BM622i, BM625, and BM626.

Read More

Huawei BM622 TFTP Firmware Download

First of all is we have to make it sure that we are able to access or connect the Huawei BM622  4G WiMAX wireless broadband modem CPE by verifying through pinging the IP address 192.168.1.1 via CLI (command line interface) or thru web GUI (graphical user interface) on browser with same IP address at http://192.168.1.1 to make it realistic as show below snap shot.

Whether or not the Huawei BM622  4G WiMAX wireless broadband modem CPE enable/disable its DHCP server we have also to verify our PC if we are using Dynamic or Static IP address to anticipate if the CPE device reboots failed to provide IP address or the PC itself can not acquire its IP address.

Static IP address is more preferable during TFTP firmware backup or downloading operation to make it sure we are in the same IP address subnet and our PC is still connected even if the CPE device fail its DHCP server during power on.

To start with, the PC must be ON with the Static IP address above mention. Power off the CPE device Huawei BM622, unplug the AC/DC adapter then plug it again and remain the power is OFF.

1. Click START and RUN, then type cmd to open windows CLI (command line interface) mode
2. Type cd\ to change directory i.g. C:\
3. Type tftp –i 192.168.1.1 get bm622firmware.bin as you can see from the screenshot below, wait DO NOT press enter yet until to do so.

4. Make sure or double check that the  LAN cable is physically connected to the PC and to the CPE device Huawei BM622 port.
5. Using a pin or sharp item insert onto the pin hole and press the “Reset” button at the side of the CPE device Huawei BM622 as shown below snapshot.

6. Press the Power ON button of the Huawei BM622 while still pressing the "Reset" button.
7. Release the “Reset” button of the Huawei BM622 and press Enter to begin the TFTP firmware download.
8. Please wait for 1 (one) minute and reboot the modem.
9. Press “Reset” while bm622 is ON.
10. Open your MyComputer  local drive C:\ and check if bm622firmware.bin is already being copied.

Read More

Huawei BM622 Blank WAN Solved!

Huawei BM622 model is the first 4G WiMAX CPE wireless broadband modem supplied by Huawei Technologies from Shenzhen's for Globe Telecom one of the major wireless broadband ISP in the Philippines. 

Recently there were so many complains from the 4G WiMAX wireless broadband subscribers that their CPE modem can't access to the internet. They have noticed upon opening the web GUI of the said 4G WiMAX CPE modem Huawe BM622 on the part of WAN interface its MAC address is missing/blank no wonder their connection interrupted or unsuccessful. 

Until now there is still an issue of so called "BLANK WAN" of Huawei BM622 4G WiMAX wireless broadband CPE, to solved this problem and issue one should knows in basic electronics skill. BLANK WAN in other words WAN chips the ST Micro/SGS M25P32 Serial flash Memory IC is corrupted this is due to malicious programming or setting done by user in wrongly manipulations.

These are the things what you need to be able to solved your Huawei BM622 BLANK WAN.

1. 50pesos LPT SPI hardware programmer or USB SPI hardware programmer (DIY)
2. TV/DVD SPI Flash programmer software (Download)
3. ST Micro/SGS M25P32 Serial flash Memory dump binary (ask Google/Forum/Neighbor/Friend)

The procedure to solve the BLANK WAN, first buy or do it yourself LPT SPI hardware programmer. Second is to download TV/DVD SPI flash programmer, third search and download BM622 WAN dump file from Google, forum, or download via TFTP your neighbor/friend BM622 ST Micro/SGS M25P32 Serial flash Memory dump binaries to your local drive.

If you have all these stuff now you can removed your Huawei BM622 WAN chips ST Micro/SGS M25P32 Serial flash Memory IC from its board and start uploading via LPT SPI hardware programmer or USB SPI hardware programmer using the TV/DVD SPI Flash programmer software.

Lastly, of course you have to put back your ST Micro/SGS M25P32 Serial flash Memory IC to its place again. If you are tired of placing it to its original position you can just soldered using 1ft/12 inches tiny wires for simplicity.

Read More

Huawe BM622i works without Spansion

Who knows that Globe Telecom WiMAX CPE wireless broadband modem Huawei model BM622i that it will still works without the Spansion 25FL128 or the ST Micro 25P128 chips? These snap shot below is taken from Symbianize forum credit to d_Bug showing that the said WiMAX CPE Huawei BM622i is on operation after pulling the chips (S25FL128 or M25P128) works fine smoothly and normal in condition.

Yes, as you can see from the screenshot above the Globe WiMAX CPE wireless modem Huawei model BM622i works perfectly after pulling the Spansion chips S25FL128.

Read More

Huawei BM622i Firmware Destroyer HW Protector

This is the latest automatic hardware protection all protected firmware and wan chips when protection is "on". Credit ko to kay boss lavaboy sa mga idea na binigay at design niya salamat bossing. nagpapasalamat din ako sa kasama kong technician na si tools1180 sa pagtulong nya sakin sa paggawa ng circuit design...

LED indicator:

1 Red = unprotected firmware & wan
1 Green = protected firmware & wan read-only mode (lan & wan cannot be change)

Switches :

1 rocker switch = on & off
1 push botton = to change wan & lan mac unprotected.

Relay and some parts.

Adapter is plug in modem off

Modem turn on

Modem protected

The modem is boot-up completed and operates with protected mode...Firmware chip is in read-only mode (no configuration setting can be changed); wan chip is in read-only mode (no wan/wimax signal settings can be changed... Wan mac cannot be changed even by the user)

This article can be found at Symbianize Forum created by soundbass1967

Read More

Scavenger Scraper v1.2 Stable WiMAX Tool

Here's is screenshot of Scavenger Scraper version 1.2 it is said that this would be the stable and final version of this software for free. This may be viral for those who longs for VIP MAC addresses for Huawei BM662i, BM622, BM626, BM625 and BM621 or any other device from Huawei for WiMAX CPE exploited that can access 4G wireless broadband to Globe Telecom.

The moment you've been waiting :D =))

pero di pa ito tapos. Di pa po ako tapos mag code :D

Added feature dito

• 1 Click Change Mac and Auto Test Download Speed, (bye bye vbs kiddie script)
• Supports Transfer Calculated Macs (Original Mac, Common Method or MY Method) to be tested.
• Once imported, you can leave your computer behind to test all macs and will record the details of the download speed.
• Supports chosen Mac Address to be Tested.
• I don't know if this will support "Disabled Telnet Services" (nag try ako disabled telnet , pero nakapag change mac ako)

Next thing to do: Tables for DL Speeds, Parser for Macs , Export Feature again

Updated Full Feature!

Mga KaSB, ito ung updated version ko. ilalabas ko nalang since wla rin talaga gusto mag share ngmac sakin. baka this way meron ng mag share ng 2mb mac :)

Feature of version 1.2

• Mac Filters

• Mac Suggest Tool (Randomizes Computations)
  
  Take note : Right Click for Menu as always, then kapag ginamit nyo yung mac sa suggest tool, automatic nasa clipboard nyo na yun. So ctrl V for paste if may plan kayo na iba :)

• Last IP Range Scanned detection

• Ping Time supported (To check for possible fast Mac)

• Records Mac as well as Device ID

• Automatic Change Mac within few clicks

• Resume Support and Export Support.

DISCLAIMER:

• by Downloading and Using this software, it is your responsibility what ever may happened to your hardwares or softwares or pc's,
• This software is 100% Clean and protected by an EAZfuscator.net, so any scan virus result is a false positive.
• You may not sell this software and CAN share this software to your blogs as long you give credits to me :)
• STRICTLY use this Software for PERSONAL USE ONLY!
• BABALA : Hindi po ito BINEBENTA, Pag binili nyo itong software na ito sa ibang tao. naku, bawiin nyo ung pera nyo :D sayang lang. Libre to e.

You can download the Scavenger Scraper v1.2 WiMAX Tool MAC Address Chnager - updated version Feb 19,2012

Scavenger Scraper v1.2 Video Tutorial Link
Scavenger Scraper v1.2 Stable Version Link

This article is taken from Filipino forum most wanted the Symbianize Forum, I am not bound to any legal or illegal for any use and misused of the program for such liabilities or responsibilities. This program is provided by its author as is and the guest blogger who posted it. - source

Read More