ZyXEL MAX318M WiMAX Outdoor Gateway

Ultimate WiMAX MIMO Technology for Ultimate Mobility

ZyXEL’s MAX318M supports state-of-the-art WiMAX technologies like Maximum Ratio Combining (MRC), MIMO Matrix A and B and beamforming that enable superior radio performance and extensive radio coverage.

Software upgrade over the air

Through the WiMAX radio interface, the MAX308M supports TR-069 and OMA-DM that are fully configurable and software upgradeable through events triggered by the operators.

Standard 802.3af PoE

The MAX318M can be connected with a standard 802.3af compliant for easy Installation.

Built-in high-gain MIMO antenna

The MAX318M provides integrated cross-polarized antenna for easy installation and high performance in different environments.

Advanced IP networking features

The MAX318M supports advanced IP networking functionalities, including Bridge and NAT Router features needed to access the Internet and Firewall security to protect the Internet access activities.

Easy-to-install antenna alignment

The MAX318M features visible LED bars showing the WiMAX radio signal strength for easier antenna alignment; it also has a built-in buzzer to help alignment if the LED bars are hard to see under direct sunlight. The included flexible mounting kit is suitable for different environments and supports easy adjustment of direction and position.

Applications

ZyXEL MAX318M Ultimate WiMAX MIMO Technology Firmware Download here
ZyXEL MAX318M Ultimate WiMAX MIMO Technology Datasheet  Download here
ZyXEL MAX318M Ultimate WiMAX MIMO Technology User Guide Download here
ZyXEL MAX318M Ultimate WiMAX MIMO Technology Support Note Download here
ZyXEL MAX318M Ultimate WiMAX MIMO Technology for Ultimate Mobility Manual pdf
ZyXEL MAX318M Ultimate WiMAX MIMO Technology Quick Start Guide Download here
ZyXEL MAX318M Ultimate WiMAX MIMO Technology for Ultimate Mobility Manual pdf2

System Specifications

WiMAX Air Interface	Reference standard: IEEE 802.16e-2005 SOFDMA / TDD Frequency: 3.4 ~ 3.6 GHz Channel Bandwidth 5 / 7 / 10 MHz DL Modulation: QPSK, 16QAM, 64QAM UL Modulation: QPSK, 16QAM FEC: CC, CTC Maximum output power at antenna port: Typical 26 dBm Sensitivity: -96dBm @ QPSK 1/2 Aggregate throughput Up to 25 Mbps Internal cross-polarized antenna: Antenna gain 15 dBi QoS : BE, UGS, rtVR, nrtVR, ertVR Security: PKMv2, EAP-TLS, EAP-TTLS  CHAP/PAP/MSCHAP/MSCHAPv2 CMAC message authentication CCM mode 128-bit AES data ciphering Idle mode, Sleep mode BS-initiated scanning and reporting Network Initiated HO (NIHO) ARQ, HARQ
ND&S	Auto selection / User selection Online subscription
Roaming	HOME NSP lock  EAP roaming ID CAPL / RAPL Configuration
IP Networking	Supports Bridge and NAT Router mode LAN to WiMAX QoS classification Firewall with SPI Content Filtering Major ALG (SIP/FTP/H.323) DHCP client/server
Management	FTP/HTTP Firmware Upgrade Web-based/SNMP/Telnet/SSH Management Over-the-Air (OTA) firmware upgrade by TR-069 or OMA-DM
Hardware Specifications	The Pole-mounting & Wall-mounting kits  One RJ-45 port to connect PoE cable with Indoor unit WiMAX connection status LEDs Rated for outdoor weather environment including ultraviolet sun radiation One Ethernet connector: 10/100 BaseT Auto MDI/MDIX (RJ-45 plug) Standard 802.3af PoE LED: Power indication
Power Specification	Average power consumption at peak: 15 W
Physical Specifications	Item dimensions (WxDxH): 255 x 255 x 55 mm (10.04" x 10.04" x 2.16") Item weight: 1071 g (2.36 lb.) Packing dimensions (WxDxH): 390 x 338 x 120 mm (15.35" x 13.31" x 4.72") Packing weight: 2460 g (5.42 lb.)
Environmental Specifications	Operation temperature: -40°C to 60°C (40°F to 140°F) Operation humidity: 10% to 90% (Non-condensing) Storage temperature: -40°C to 65°C (-40°F to 149°F) Storage humidity: 10% to 95% (Non-condensing)
Certification	CE certification Water Tightness: IEC529 / IP65 WiMAX Forum Wave II Compliance

Posted in: MAX318M, WiMAX, ZyXEL