If you want to access your SmartBro Motorola Canopy SM (Subscriber Module) and be able to tweak it’s Administrator settings such as root and admin or wanted fix your intermittent connection, one best way to do it is knowing it’s IP address, but how can you do it? Well, here is a DIY step-by-step procedure on how you can safely get the IP address of your SmartBRO Canopy so you can access and manage your SmartBRO Canopy settings.
Any new subscriber of SmartBro will have the 10.xxx.xxx Motorola Canopy address
1. Go to network connections in the control panel
2. Right click on the local area network
3. Highlight Internet Protocol and click on properties
4. Set to Use the Following IP address
5. Set the IP Address to “10.20.30.40″
6. Set the Subnet to “255.0.0.0″
7. Leave the gateway blank
8. Leave the DNS blank
9. Apply the changes
10. Then go to command prompt
11. Type in the command prompt c:\arp -a
arp -a this will displays current ARP entries by interrogating the current protocol data.
If inet_addr is specified, the IP and Physical addresses for only the specified computer are displayed. If more than one network interface uses ARP, entries for each ARP table are displayed.
12. It will show several IP address
screenshot of your SmartBro Motorola Canopy IP address is 10.245.180.126
13. After you get the IP address of your canopy, open your browser (I prefer Mozilla Firefox)
14. Type the IP address at the address bar to get access to the smartbro admin site.
After you gain access to your SmartBro Administrator GUI (graphical user interface) you can now be able to tweak some settings and troubleshoot connections.
10 comments:
Sir, i tried the steps above but when I did the arp -a command, I got No ARP Entries Found. :(
I connected the mybro LAN directly to my laptop before I did the steps you said. Naka-connect kasi sya sa wifi router ko so I disconnected muna then connect sa laptop ko pero I got the error which is No ARP Entries Found.
pls help po. TIA
may way ba para ma access yun canopy gamit windows 7? sa windows xp kasi gumagana naman yun 169.254.1.1..
bukod sa virtual machine, may way ba/ technq para ma access yun canopy gamit windows 7??
@ beching08 :
Bro ang SmartBro Motorola Canopy antenna kahit ano operating system (Windows 8,7, Win'95, '98, XP, Vista,Mac, Linux) pede ma access ang GUI at kahit ano virtual machine pede din ma access.
patulong po hindi ko ma-access canopy ko, followed the steps above pero ayaw eh.
sir @Jonathan Delarama
10.255.255.255 is this a valid canopy ip address??
@ axlecrew19 :
Palagay ko Bro pra di kana mahirapan hard reset mo na lng at palitan username & password. eto pala link kung panoi gawin
http://pakitong.blogspot.com/2013/06/smartbro-motorola-canopy-subscriber.html
10.255.186.174 ang nakita ko kanina sa umayos ng internet connection namin.
@jksy :
Sa wakas nakita m din Bro, cge share na lng experience mo jan sa SmartBro mo.
sir pde magpatulong dko kasi maccess cannopy ko ee
Post a Comment