The DSL-2640B wireless ADSL router is an affordable high-performance ADSL router for home and the small office. With integrated ADSL2+ supporting up to 24Mbps download speed, 802.11g wireless LAN, firewall protection, Quality of Service (QoS) and 4-port switch, this router provides all the essentials that a home or small office needs to establish a secure and high-speed remote link to the outside world.
This modem replaced a modem provided by TMNet my ISP (the second one from them) which had been providing the worst DSL experience I ever had. After a simple install, it worked perfectly, and I have not had a single loss of service or speed issue since.
Streamyx Internet Connection with D-Link DSL-2640B setup
Make sure your power,phoneline and Lan cable connected to modem
Open any browser (chrome,internet explorer,firefox)
Type 192.168.1.1 on the address bar then press enter
Type Username and Password (default both username and password is tmadmin if router provided by TM streamyx)
Go to Quick Setup, change ‘Protocol’ to PPPoE. ‘Leave Connection’ mode as ‘LLC’. Then key in your Streamyx ID n password. Hit ‘next’.
Change your network name (e.g John’s Network) in ‘SSID ‘and your wireless network password in ‘Network Key’. Hit ‘Next’.
Your almost there. Check all the settings before hit ‘Save/Apply’ and 'Logout'. Now you are ready to go.
The D-Link DSL-2640B uses Broadcom Chips BCM96338, you can explore on this command line interface (cli) thru telnet and ssh for more shell command available on this residential gateway.
Device Info, a summary of all information from Board ID, Software version, Bootloader version and others. Don't be surprised this is identical with Innacomm W3400V Wireless Modem from hardware to software only the color that is being blended.
The Innacomm W3400V Wireless Modem is also TMNet Streamyx ADSL subscriber modem supplier by other contractor, all TMNet Streamyx modem have alomost same username and password.
0 comments:
Post a Comment