Dec 13, 2014

My Diskless Server : MSI MS-S0651 Quad LAN 10 SATA

The MSI MS-S0651 is the only rug server motherboard that I have found to have four (4) NICs, yes that is true it have quad network interface controller card power by Intel 82574L Gigabit Ethernet. Apart from 4X LAN it is also equip with ten (10) SATA of which 6 SATA is 3.0 and 4 SATA is 2.0 good enough to boost my Diskless Server. CCBoot 3.0 is much favorable for this Mobo serving 30 to 70 clients if the hardware is much together with the specifications.


The most significant that MS-S0651 can do the job is when all four (4) Intel 82574L Gigabit Ethernet controllers are aggregated, it can be Team together and this can give roughly 4Gbps to eliminate the bottleneck when the BattleLAN gamers are onboard.

Hardware overview



Specifications

CPU
  • Single Intel® Core i3/ i5/ i7, Pentium G, Celeron G series
Core Chipset
  • Intel H77 chipset
Memory Support
  • 4 x DDR3 DIMM slots
  • Support DDR3 1066/1333/1600 MHz Unbuffered non-ECC Memory
  • Supports Max. 32GB
  • Ivy Bridge supports up to 1600 MHz
Slot
  • 1 x PCI Expressx16 slot
  • 2 x PCI Expressx1 slot
Storage Interface
  • SATA
    • 2 x SATA 6Gb/s ports by Intel H77 chipset (SATA1-2)
    • 4 x SATA 3Gb/s ports by Intel H77 chipset (SATA 3-6)
    • 4 x SATA 6Gb/s ports by ASMEDIA ASM1061 chipset (SATA7-10)
  • RAID
    • -SATA1-6 support Intel Rapid Storage Technology (RAID 0/1/5/10)
Input / Output Connectors
  • Rear I/O Port
    • 4 USB 2.0 ports
    • 2 USB 2.0 ports
    • 1 Serial port
    • 1 D-sub VGA port
    • 4 Gigabit LAN Jacks
  • On-Board Connector
    • 1 SPI Flash ROM pinheader
    • 1 Serial port
    • 1 TPM [omjeader
    • 2 front panel pinheader
    • 1 PS/2 Keyboard/mouse pinheader
    • 1 8-pin power connector
    • 1 24-pin power connector
    • 4 system fan connector
    • 1 CPU fan connector
    • 2 USB 2.0 pinheader
    • 1 USB 3.0 pinheader
    • 1 chassis intrusion pinheader
    • 1 clear CMOS pinheader
LAN Interface
  • Support 4x Intel 82574L Gigabit Ethernet controllers
Hardware monitor controller
  • N/A
Board Size
  • 30.5cm x 24.5cm (ATX)

0 comments:

Post a Comment