Disecting Huawei EchoLife HG850

Huawei Echolife HG850 GPON Terminal FTTX ONU with 4 etherent port and 2 voice port of white ONU with SC/APC input

Specifications : Flash memory (8MB), SDRAM (16MB), Service port ( 4 Port 10/100 Base-TX RJ45 ; 2 Port POTS interface RJ11), Uplink Port (1 Port GPON SC/APC type), Power Adapter (input 100-240 VAC, 50-60 Hz, output 12V-1A)

Functionality : G PON interface ( Compliant to ITU - T G.984.2; support Forward Error Correction; Multiple T-CONTs per device; Support for multicast GEM port)

Layer 2 ( Untagged Port configuration, Standard Ethernet Bridging, Address Learning with auto aging, Bridging acc. to IEEE 802.1D and IEEE 802.1Q)

VLAN ( VLAN Port filtering, Destination Address port filtering, Source MAC address learning)

Multicast : IGMP Snooping

POTS : 5 REN, Balanced Ring, 55V RMS; DTMF dialing, Multiple Codec: G.711, G729, G723.1; Echo cancellation; T.38/G.711 pass through FAX mode

QoS : HW-based internal IEEE 802.1p(CoS); Strictly Priority, 4 Queues per port.

Huawei EchoLife HG850 Specifications here

Huawei EchoLife HG850 Firmware and Documentation here

Read More

How-To Access Huawei HG850A Maxis/Unifi : Any Custom Router Possible Now!,

Due to many ppl pm me to ask for the access into HG850a, here is it.. If you're using Maxis FTTH, this setup will enable you to plug the telephone into the HG850a, use custom router and you can put your Thompson router into store room or maybe rubbish bin. 

You can go straight to the end of this post to see the final outcome.

Do it at your own risk.

Preparation

1. Download & install autohotkey http://l.autohotkey.net/AutoHotkey_L_Install.exe

2. After finish install autohotkey, launch it and right click on the AutoHotkey icon at the right corner taskbar, click on "edit this script", a notepad will open. Change the content to following:

CODE

^!z::

Send enable{Enter}configure terminal{Enter}shell{Enter}iptables --flush{Enter}

return

^!x::

Send iptables --flush{Enter}iptables --flush{Enter}iptables --flush{Enter}iptables --flush{Enter}

return

3. Save it and close the notepad, right click the AutoHotkey icon again and click "reload this script"
4. Download putty http://tartarus.org/~simon/putty-snapshots/x86/putty.exe
5. Configure your pc ip to 192.168.100.123 subnet 255.255.255.0
6. Switch off the HG850a and plug LAN cable connect ur pc to the HG850a LAN 2

Action
1. Open a command prompt [windows key + R, type ' cmd ', enter]
2. Type ping 192.168.100.1 -t to perform continuous ping to 192.168.100.1

CODE

ping 192.168.100.1 -t

3. open putty client and ready for telnet: input 192.168.100.1 and choose telnet. Dont click 'Open' Yet.

4. Switch on ur HG850a and check the continuous ping

5. Once you saw you're getting Reply from 192.168.100.1.. IMMEDIATELY click "Open" in the putty client.

6. You're now successfully telnet into the HG850a but dont be happy, your access will soon be block once the HG850a finish loading the iptables, so you need to perform the following steps quick and accurate.

7. Login using this credentials

username: root
password: admin

8. press the hotkey [ ctrl + alt + z ] , wait for the command to finish typing, then immediately repeat pressing [ctrl + alt + x], let the command finish typing between the interval.This is the Hotkey that we configure into the AutoHotkey previously. This is to let the AutoHotkey help us to type the command in a very short time, before the iptables kicks in and repeatedly wipe the iptables.

9. After around 10 seconds, if you still get response from the telnet (respond to your "enter"; press enter can go next line), then you're safe for now.. but not permanent, if u power off and power on your HG850a, you will need to do from step 1 again.

Configure to have permanent access and no need to hassle so much, perform the following:

Web Interface

1. Open your browser, go into http://192.168.100.1
2. Login with admin account:
Username: telecomadmin
Password: hs5711Bbfh
3. go to 'maintain' > 'device' > 'configure file' > 'Download Configuration File' to backup the config.

4. after download, make a duplicate copy of your config so that if anything goes wrong you still have the original config.
5. open the 'downloadconfigfile.conf' using notepad
6. ctrl+f to find

CODE

AclServices HTTPLanEnable

7. change that line to

CODE

AclServices HTTPLanEnable="1" HTTPWanEnable="0" TELNETLanEnable="1" TELNETWanEnable="0" FTPLanEnable="0" FTPWanEnable="0" SSHLanEnable="0" SSHWanEnable="0"

8. save it and go to the HG850a web interface, go to 'maintain' > 'device' > 'configure file' > 'choose file' > select this modified config > 'Upload Configuration File'

9. After finish restore, power off and on the HG850a, you should now able to access the web interface and telnet even after power cycle.

Setup VoIP into HG850a [Maxis]

1. Go to 'Basic' > 'WAN' and you should now see by default '1_VOIP_R_VID_400' {not too sure about the name but I know there is a default there}
2. click on it to select, change the VLAN ID to 822. Change and save it as below

3. Go to Status > 'Device' > 'WAN' you should see it connected with an ip address

4. Go to 'Basic' > 'VoIP' and setup the SIP as follow

5. Go to 'Status' > 'VoIP' , you should see the status 'Registered' and the 'voip' led on the HG850a should lid up.

6. Plug your telephone into 'Tel 1' Port and try to make a call to your mobile phone.

This article can be found at LowYat forum.

Read More

Cisco WRVS4400N Wireless-N Gigabit Security Router - VPN v2.0

Highlights

• Secure, high-speed wireless network access for small business
• Gigabit Ethernet connections enable rapid transfer of large files
• Advanced security, including intrusion prevention, helps keep assets safe
• Full IPsec VPN capabilities for up to five remote connections

Features and Benefits

The Cisco WRVS4400N Wireless-N Gigabit Security Router offers:

• High-speed connectivity: Gigabit Ethernet connections on both WAN and LAN ports help you take full advantage of your broadband connections, enabling your employees to send and receive large files quickly and easily.
• Integrated 802.11n wireless access point: A built-in access point enables your employees to connect to the network wirelessly. Support for draft 2.0 of the 802.11n industry standard, along with backward compatibility with 802.11b and g standards, increases wireless speed, throughput, and range, for more efficient wireless coverage of your small office.
• Proven Stateful Packet Inspection (SPI) firewall with Intrusion Prevention System (IPS): Unlike standard firewalls, which block incoming streams based only on the source or type of data, the intrusion prevention system scans deep, enabling it to detect and block most worms, Trojan horses, and denial-of-service attacks to help keep your business assets safe.
• VPN capabilities: IP Security (IPsec) VPN capabilities built into the WRVS4400N enable your remote employees, whether working from home or on the road, to connect to your office network using nearly any VPN client to access files and transfer data as securely as if they were in the office.
• Optional Cisco ProtectLink Web security service: This optional hosted service adds another layer of protection to your network by blocking malicious websites and controlling web access, without the drain on your office PCs caused by traditional security solutions.
• Flexible segmentation of users: Flexible, built-in support for up to 4 multiple service set identifiers (SSIDs) and up to four 802.1Q virtual LAN (VLAN) connections enables the creation separate virtual networks to allow secure guest access and improve traffic flow (Figure 2). The WRVS4400N can interoperate with other VLAN-capable switches, further enhancing flexibility.
• Limited lifetime warranty.

 Cisco WRVS4400N wireless-N Gigabit Security Router review found on this forum.

Cisco WRVS4400N wireless-N Gigabit Security Routerspecifications and documentation here.

Wireless VPN router

Pros:

I bought two Linksys WRVS4400N routers to manage a business from my office with a site to site VPN connection. I have previously managed a Cisco PIX 515E VPN appliance in a corporate enviornement for 5 years. To begin the install I enabled remote management on the customers existing router and copied the config to the new WRVS. 

Then I placed it on site. The customer was literally off the internet for less the two minutes while I swapped the cables into the new router. I had to flash the BIOS and upgrade the IPS signature files before placing it, this is certainly a inconvience, but that is how networking equipment goes. After returning to my office, I wanted to set up the site to site so I connected remotely to the router on the client side and http'ed to my local router. The documentation for VPN's is ok but could be better. Seems to be written by someone who has not actually set up a site to site, just read about it. I spent a few hours trying to bring up the tunnel with no luck, the name of the tunnel was two words with a space, I removed the space and the tunnel came right up! 

I searched Cisco documentation but if they are aware of the issue they don't report it in any way. The wireless connetion is ok, I find I must disconnect and reconnect the wireless connection is windows if the box has been idle for several hours. For the most part, this is a very good vpn router for a few hundred bucks. I will buy more as I add clients for remote support.

Cons:

The documentation could be better. I could not get the site to site VPN tunnel up so I looked to the advanced tab and they seem to have forgottened to document this area as an afterthough. They should tell you that the advanced area can be left as default only. The problem was a space in the tunnle name, appears to be another undocument Cisco secret.

Read More

ITU: 70% of all Countries have a National Broadband Plan

A new report by the ITU's Broadband Commission covers the status of Broadband services around the globe.

"Affordable broadband connectivity, services and applications are essential to modern society, offering widely recognized social and economic benefits. The Broadband Commission for Digital Development promotes the adoption of broadband-friendly practices and policies for all, so everyone can take advantage of the benefits offered by broadband".

Among other aspects, the report shows the adaptation of National Broadband plans.

Source: ITU/UNESCO

"Although in many countries, broadband deployment has been realized through the efforts of the private sector, Governments play an essential role in ensuring a stable regulatory and legal framework to foster and incentivize investments, create a level playing-field amongst the different actors present in the market, establish adequate spectrum policy and reasonable spectrum allocation, and ensure long-term and sustainable competition. Governments can also implement programmes such as e-government, digital literacy initiatives and connected public institutions and locations.

Progress on policy leadership is relatively recent, with an explosion in the number of countries introducing broadband plans in 2009-2010 (Figure 4). Prior to 2006, most plans focused on information society issues, with broadband coming to the fore from 2008 onwards. More recently, Digital Agendas have grown in popularity, incorporating a cross-sectoral perspective. By mid-2013, some 134 or 69% of all countries had a national plan, strategy, or policy in place to promote broadband, and a further 12 countries or 6% were planning to introduce such measures in the near future (Figure 5). However, some 47 countries (or nearly a quarter of all countries) still do not have any plan, strategy or policy in place. Even if countries have plans, achieving progress in implementation may prove challenging or slow".

See "The State of Broadband 2013: Universalizing broadband" - here.

Read More

How-To UniFi : Configure Huawei HG655a BTU as a MODEM ROUTER

UniFi - Huawei HG655a BTU as MODEM ROUTER

There are several forum members from LowYat requested for a guide that how-to configure Huawei HG655a BTU as a modem router. So that user can directly connect their PC into Huawei HG655a BTU's LAN ports.

This is  the standard UniFi setup

Note that the Huawei HG655a LAN Port 1 is connected to D-Link DIR-615a's WAN Port where as the LAN Port 4 is connected to TM IPTV.

UniFi will provide a D-Link DIR-615 Wireless router or RG TMRnd Wireless router for all users no matter you're applying for Residential or Business use. Above is the standard setup for all UniFi users.

This will be how it looks like the configuration of  Huawei HG655A as a Modem Router

After following my guide your setup will look like the above diagram. Your PC or Network Switch will be directly connected to Huawei HG655A LAN ports.

THINGS TO PREPARE BEFORE WE PROCEED

• Make sure you have your UniFi login ID and Password. The login ID should be xxx@unifi or xxx@unifibiz
• Download Mozilla Firefox because sometimes the Huawei HG655a WebGUI will not work in Internet Explorer.

Let's begin..

Step 1 (Manually set Fixed IP):

Plug in a network into Huawei HG655a VDSL Modem LAN port 2. Because Huawei HG655a VDSL Modem by default the DHCP is disabled so you should configure manually set Local Area Connection to fixed IP like the example below.

Step 2 (Login to Huawei HG655A) :

Open Mozilla Firefox and type the URL http://192.168.1.1/ key in the username and password below and click Login.

Username: admin
Password: hs5711Bbvl

Step 3 (Backup Configuration File):

• Go to Basic > WAN > select ptm1.500
• Uncheck all Port Binding
• Connection mode: Route
• Type your UniFi login and password

Step 5 (Enable DHCP Server):

• Go to Basic > LAN
• Under DHCP Server check Enable
• Start IP Address: 192.168.1.100
• End IP Address: 192.168.1.254
• Primary DNS Server Address: 8.8.8.8
• Secondary DNS Server Address: 208.67.222.222

Step 6 (Verification):

• Restart the Huawei HG655a BTU
• Login to the admin page
• Go to Status > WAN > Network > Ensure the ptm1.500 is connected
• After login navigate to Maintenance > Device > Configuration File tab. You should always backup your config file before proceed to the next step.

Once its connected you're ready to online!

Read More

ZTE ZXDSL 931DII Connect to UniFi with Generic Custom Router

This is a UniFi Custom Setup wiring diagram :

Your Own Router's WAN Port will connect to ZTE ZXDSL 931DII LAN Port 1.

THINGS TO PREPARE BEFORE WE PROCEED

• Make sure you have your UniFi login ID and Password. The login ID should be xxx@unifi or xxx@unifibiz
• Download Mozilla Firefox because sometimes the ZTE ZXDSL 931DII will not work in Internet Explorer.
• The DSL Router / Wireless Router (Your Own Router). Note that this guide will not work for ADSL Modem + Router! We just need a normal Router with 1 x WAN + 4 x LAN Ports or Firewall appliance.

Step 1:

• Plug in your LAN cable with your PC to ZTE ZXDSL 931DII VDSL Modem LAN port 4.

Step 2 (login to ZXDSL 931DII):

• Open Mozilla Firefox and type the URL http://192.168.1.1/ key in the username and password below and click Login.

Username: admin
Password: hs5711Bbvl

Step 3:

• Backup the configuration.

Step 4 (Removing VLAN Tagging):

This step is to remove the VLAN tagging from the port.

• Click on WAN -> VLAN Trunk on left menu.
• Select LAN Interface select LAN1
• Untick Enable Vlan Trunk
• After uncheck Enable Vlan Trunk then click on Submit button.

Step 5 (Connecting UniFi with Custom Router):

•  Plug your custom router WAN Port cable to ZTE ZXDSL 931DII LAN Port 1.
•  Connect your PC to Your Own Router.
•  Login to Web Configuration page.

The above screen shot of my TP-Link WR841N stock firmware. Go to WAN select PPPoE key in your UniFi login ID and password. You should be able to connect to Internet with Your Own Router now! Enjoy!!

Read More

Overunity free energy generator

Have you ever heard of Free Energy? Yes, long before there is already a FREE alternative source of energy such as Solar, Bio-fuel, Windmill and others similar and alike that can generate energy that cost you zero cents.

These two mini electric fans are home residential appliances that uses 220VAC motors that, if this small electric fan plug onto the wall outlet AC definitely it will rotates and produces air for convenience. What I do not know is that this AC motors of the electric fan it we rotates it manually or automatically it can also provide us AC voltage.

Looking closer to the different of electric fan motors,on the two above examples the type of its motors is an M-01 AC motor. More additional motor information here.

Now its to see is to believe that the mini AC electric fan motors can really generate an AC voltage.

Read More

Kingston DataTraveler 101

Kingston’s family of DataTraveler USB Flash drives are among the most recognized around the world and are always being updated.

DataTraveler 101 Features/Benefits:

• Capacities – 4GB, 8GB, 16GB
• Dimensions – 2.19” x 0.68” x 0.36” (55.65mm x 17.3mm x 9.05mm)
• Weight – 0.42 oz. (12g)
• Operating Temperature – 0° to 60° C / 32° to 140° F
• Storage Temperature – -20° – 85° C / -4° to 185° F
• Convenient – Pocket-sized for easy transportability
• Simple – Just plug into a USB port
• Practical – Capless swivel design protects USB connector; no cap to lose
• Guaranteed – Five-year warranty
• Fashionable – Available in cyan, pink & yellow

This what is my Kingston Datatraveler 101 4GB look like as in this forum.

I have this case:
_________
Enclosure
_________
Kingstong
4 GB

__________
Controler:
__________
Toshiba
TC58NC6688G1F
HLCH5-001
0844A
TAIWAN

__________
NAND CHIP
_________
TOSHIBA X34048
TAIWAN
1X TH58NVG5D2ETA20
2 bANKS (2 X 2048 MB)

USB Flash Drive Controller from Toshiba TC58NC2233G5F that supports up 32GB of NAND

Flash Memory Toshiba TH58NVG5D2ETA20 datasheet download here.

Read More

Kworld Media Player M101

Media Player M101 (M101)

Stand-Alone Media Player for USB Memory Stick, Memory Card and USB HDD.

Digital Entertainment on the Bigger Screen

Setup your Media Player M101 beside your TV in the living room, for better comfort and seating arrangement, and enjoy your digital entertainment conveniently stored in your portable hard disk or USB thumb drive on the bigger screen.

Playback in Multi-Format

Media Player M101 supports digital media playback in multi-formats. For RMVB/RM file, the dock supports streaming up to 1600 KB/s for smooth, uninterrupted entertainment. Media Player M101 transforms your TV into an entertainment center and a digital photo frame.

Supports YPbPr Output at 720p

Just plug any Memory Card/USB storage device into your Media Player M101, playback and enjoy the videos you have collected in maximum resolution of 720p!

Bonus: Format Factory

Instead of looking for converting softwares to download, KWorld has included a bonus software.With Format Factory, you can maximize the use of KWorld Media Player M101.

Kworld Media Player M101 forum discussion, official website specifications, firmware download and manuals.

Read More

Jetway MVB-VX9GSM

This page contains information about installing the latest Jetway Embedded CPU MVB-VX9GSM (VIA VX900 Chipset) driver downloads using the Jetway Driver Update Tool.

Jetway Embedded CPU MVB-VX9GSM (VIA VX900 Chipset) drivers are tiny programs that enable your Motherboard hardware to communicate with your operating system software. Maintaining updated Jetway Embedded CPU MVB-VX9GSM software prevents crashes and maximizes hardware and system performance. Using outdated or corrupt Jetway Embedded CPU MVB-VX9GSM drivers can cause system errors, crashes, and cause your computer or hardware to fail. Furthermore, installing the wrong Jetway drivers can make these problems even worse.

Recommendation: If you are inexperienced with updating Jetway device drivers manually, we highly recommend downloading the Jetway Embedded CPU MVB-VX9GSM (VIA VX900 Chipset) Driver Utility. This tool will download and update the correct Jetway Embedded CPU MVB-VX9GSM (VIA VX900 Chipset) driver versions automatically, protecting you against installing the wrong Embedded CPU MVB-VX9GSM drivers.

• VIA VX900 Chipset
• Integrated VIA Nano™ L2007 1.6G 25W Processor(65nm)
• Integrated Chrome9 HD DX9 3D engine
• Supports un-buffered DDR3 800/1066MHz SDRAM
• Support 1 x 32-bit PCI slot &1 x PCI Express x16 slots
• Support 2 x Serial ATA 2 Devices
• Onboard 10/100 LAN
• Support 1080p full HD
• VIA VT1705 HD Audio Codec with 6-Channel
• 190 x 170mm M-ATX Form Factor

VIA VX900 Chipset

The VIA VX900 features the VIA ChromotionHD 2.0 video engine, boasting hardware acceleration of the most demanding video formats for both locally stored and cloud based HD video content, providing incredibly smooth playback of the most visually stunning multimedia titles at resolutions up to 1080p without incurring a heavy CPU load.

VIA Nano™ Processor

The first 64-bit, superscalar processors in VIA's x86 platform portfolio, VIA Nano processors have been specifically designed to revitalize traditional desktop, mobile and server markets, delivering truly optimized performance for the most demanding computing, entertainment and connectivity applications.

VIA ChromotionHD 2.0

VIA ChromotionHD 2.0 video engine boasts hardware acceleration of the H.264 codec technology that is driving today's advanced online HD video streaming services, bringing crisp, smooth 1080p HD video content to life without hogging key system resources or resorting to an additional third party decoder. The ChromotionHD 2.0 fully programmable video engine that supports the latest video codecs including full Blu-ray support at true HD screen resolutions, including HDTV resolution playback of MPEG-2, WMV-HD, VC-1 and H.264 content. Additional enhancements include motion compensation, transform, de-blocking, full VLD support, and AVS support.

Serial ATA2 3Gb/s

This platform supports reliable storage solution for enhanced data protection and data accessing performance. Serial ATA 3Gb/s is firstly introduced in this platform to provide blazingly 3Gb/s bus bandwidth thus higher disk performance.

Read More

Utility for USB flash drives for ChipsBank controllers firm

ChipsBank CBM2092 Umptool v2.1.02 beta  

The utility for USB flash drives on the controllers firm ChipsBank CBM2092; CBM2092P 

CBM3082 SD / MMC mptool308x v2.1.23  

Utility to fleshnakopiteley and card reader controllers Chipsbank CBM3082 

Chipsbank CBM209X Umptool v5535 20110923  

Utility to recover fleshnakopiteley controllers Chipsbank 2093A1/2093P/2095/2096/2096P/2193A1 

Chipsbank CMB1180 Umptool v4.02 mlc(update config)  

Update utility for flash drives on the controllers firm Chipsbank CMB1180, CMB1181, CMB1183 with the new settings to flash memory

Chipsbank Umptool v5532 20110428  

utility to recover fleshnakopiteley controllers Chipsbank CBM2093A1, CBM2093P, CBM2095, CBM2096, CBM2096P, CBM2193A1, CBM2193P. 
{2093A1P | 2095 | 2096 | 2096P | 2193A1P} 

Chipsbank CBM2093A1 CBM2093P CBM2095UMPTool V5520 (2010-11-10)  

Utility to restore the flash controllers Chipsbank CBM2093A1, CBM2093P, CBM2095. Instead of or in addition http://flashboot.ru/Files-file-531.html ------------------ --------------------- The old version does not work, had to find a new one. Restored the stick (8 Gb).Device ID: VID = PID = 1E3D 2095 Serial Number: CCBB1106062309220469468700 Revision: 5.00 Chip Vendor: Chipsbank

CBM2092 UMPTool V2.0.33 091,030  

The utility for USB flash drives on the controllers firm Chipsbank CBM2092. 
main differences from V2.0.01 (090 807) : 
1. An updated database. 
2. Ability to change settings and BLOCK_OF_CHIPS PAGE_OF_BLOCK and others in the program itself (Settings / Advanced)

CBM2090 CBM2090E UmpTool V1.6.9 070 712  

Utility to restore the flash controllers and Chipsbank CBM2090 CBM2090E. 

CBM2093A1 CBM2093P CBM2095 UMPTool (20,100,722)  

Utility to restore the flash controllers Chipsbank CBM2093A1, CBM2093P, CBM2095. 

CBM2093 UMPTool v3.3.9.1 091,127  

The utility for USB flash drives on the controllers firm Chipsbank CBM2093. 
CBM2090 CBM2091 FlashDiskManagerv1.5.1  

The utility for USB flash drives on the controllers and the company Chipsbank CBM2090 CBM2091. 

CBM2093UMPTool v3.3.8.7  

The utility for USB flash drives on the controllers firm Chipsbank CBM2093. 

CBM2092 UMPTool V2.0.01 090,807  

The utility for USB flash drives on the controllers firm Chipsbank CBM2092.

CMB1180Umptool v4.02 mlc  

The utility for USB flash drives on the controllers firm Chipsbank CMB1180, CMB1181, CMB1183. 

CBM3082 MP 2.0.15  

The utility for USB flash drives on the controllers firm Chipsbank CBM3082. 

CBM2092 UMPTool V2.0.0 (081105)  

The utility for USB flash drives on the controllers firm Chipsbank CBM2092. 

CBM209X Umptool V1.9.32 1105 (081 105)  

The utility for USB flash drives on the controllers firm Chipsbank CBM2091, CBM2092. 

UMPTool CBM2076, CBM2080, SW6888 V4.0  

Utility to flash drive controllers firm Chipsbank CBM2076, CBM2080 chip and fingerprint recognition BioPrint SW6888 from the company Symwave. 

ChipsBank CBM209X EUMPTOOL V1.7.3  

Utility to restore the flash controllers Chipsbank CBM2090. 
Possibly suitable for a series of other controllers CBM209H. 

Chipsbank CBM2091 8bit ECC MPTool ver1.9.15 (080503)  

Utility to restore the flash on the controller Chipsbank CBM2091. 
Possibly suitable for a series of other controllers CBM209H. 
CBM3080 MPTool v1.3.0.76 SD MMC  

A utility for flash card readers and controllers firm Chipsbank CBM3080. 

UMPTool CBM2076 + SW6888 V3.20  

Utility to flash drive controllers  Chipsbank CBM2076 chip fingerprint recognition BioPrint SW6888 from the company Symwave. 

CBM2090E2091 MPTool V1.9.13 8bit ECC0314[20080228]  

Utility to flash drive controllers Chipsbank CBM2090E CBM2091. 

CBM2090E2091 Umptool V1.9.5 [20071227]  

Utility to flash drive controllers Chipsbank CBM2090E CBM2091. 

UMPTool 4.1 (CBM2080V4.05 MLC)  

Utility to flash drive controllers firm Chipsbank CBM2080.

Read More

Utility controllers iCreate

iCreate i5188 AllNewChinaPD v.1.5 0309  

Utility controllers iCreate i5188. 

iCreate i5188 (PDx16 V1.57 beta1)  

Branded utility controllers iCreate i5188. 

iCreate i5188 (PDx16 V1.56-B15)  

Branded utility controllers iCreate i5188. 

iCreate i5188 (PDx16 V1.54)  

Branded utility controllers iCreate i5188. 

iCreate AllNewChinaPD v1.2 (i5188,i5127)  

Utility controllers iCreate i5188 and i5127. 

iCreate i5188 (PDx16 V1.51)  

Branded utility controllers iCreate i5188. 

iFormat2 v1.32 (UFDisk FormatTool2) i5122-i5128-i5129  

Utility controllers iCreate i5122, i5128, i5129. 

iFormat2 v119 (UFDisk FormatTool2) i5122-i5128-i5129  

Branded utility controllers iCreate i5122, i5128, i5129. 

iCreate i5060-i5062 ZD V2.20  

Utility to restore the flash controllers iCreate i5060 and i5062. 

iCreate i5062 (50,621) LQV 0.5B  

Utility to restore the flash controllers iCreate i5062, i50621Q. 

iCreatei5068 (PDx8_2k_v311)  

Utility to restore the flash on the controller iCreate i5068 

iCreate PDx16 i5122 V1.08  

Utility to restore the flash on the controller iCreate i5122 

iCreate PDx16 (i5128-PDx16V1.34)  

Utility to restore the flash on the controller iCreate i5128 

iCreate-i5062-V2.0  

Utility to restore the flash on the controller iCreate i5062 

iCreate i5127-i5128 PD V1.083 B3  

Utility to restore the flash controllers iCreate i5127 and i5128. 

iCreate PDx16 (i5128-PDx16V1.32)  

Utility to restore the flash controllers iCreate i5128 write comments on the use of the program.

Read More

Utility for restoring flash drives on the controller Netac

Netac NT2060 repair U258  

Utility for restoring flash drives on the controller NT2060.

Netac U210 NT2060 MPTool v1.0.0.6  

Utility for restoring flash drives on the controller NT2060. 
In particular VID: 0DD8 PID: 1A34

Netac U210 Repaire Tool For NT2039  

The utility model on the controller Netac U210 NT2039. 

Netac Driverless Plus OnlyDiskFormat Tool (SSS6633)  

Tool for repairing the flash on the controller Netac. Works with controllers SSS6633. 

Netac U219 OnlyDisk NT2039 Format Tool  

The utility model on the controller Netac U219 NT2039.

Netac U219 NT2039 Factory Tool  

Utility models for restoration Netac U219 flash drives on the controller NT2039. 

Netac U260 Low Level Format NT2039  

Utility for restoring flash drives on the controller NT2039. 

Netac RepairTool  

Utility to restore the flash controllers firm Netac. 

NT2033CMS (MPTool CMS 20,070,706v1.0.2.20)  

Utility to flash controllers Netac NT2033. 
Possibly suitable for other models of this manufacturer of controllers (NT2039, etc.).

Read More

Proprietary low-level formatting utility for flash and repair for the controller OTI

OTI PT Multi-Device 2.9.0.23 (216X)

Proprietary low-level formatting utility for flash and repair for the controller OTI.
Supports controllers: 2167, 2166, 2169M, 2165, 2168, 2168B5, 2169SB5, 2189SB3, 2168B6, 2168SB6, 6828, 6128, and others.
Quick Start Guide.
Make sure that your flash is set the controller OTI.
Install the program, connect the flash drive. If not defined, go to Menu Driver> Reinstall. If defined, you will see ...

OTI 1901 MMC

Utility for the card reader controllers OTI 1901.

OTI 2126

Utility for the card reader controller OTI 2126.

OTI 1905 v1.05

Utility for the card reader controllers OTI 1905.

OTI6808-V1.30

Utility to recover low-level formatting and flash controllers OTI 6808.

OTI PT Multi-Device (PTMD2.9.0.11D)

Proprietary low-level formatting utility for flash and repair for the controller OTI.
Supports controllers: 2167, 2166, 2169M, 2165, 2168, 2168B5, 2169SB5, 2189SB3, 2168B6, 2168SB6, 6828, 6128, and others.

RDGenerator (RecoverDisk1103)

Low-level format utility for USB Flash Drive.  Directly alter the controller Flash Drive.
In the files, the program RDGenerator.exe and configuration files for the controller:
OTI 2168
OTI 6228
0151 - Silicon Integrated Systems Corp
5151 - SanDisk

Read More