Why Decaffeinated Coffee Not Allowed for the Anti Yeast Diet

On this article, Candida Home Remedies blog presents you with article Why Decaffeinated Coffee Not Allowed for the Anti Yeast Diet. No matter what problems you have: candida and diseases, yeast infection symptoms, or anti yeast diet, make sure you visit us often. Check more details below.

My friend wants to know why even decaffeinated coffee is not allowed for the anti yeast diet. She has been having one cup in the morning and it is from the health store. She reads on one yeast site that it was ok to drink one cup of decaf per day if you really need it. Now, she is really confused as she didn’t know that decaf is not ok. She is having a very hard time giving up that first morning cup. She also wonders if coffee enema will be a bad thing to do, too.

I am not sure exactly why, but I know that decaf is considered worse than regular coffee, yeast or no yeast. But for me, it is best to give up gradually. Now, I no longer need the first cup in the morning, but I have one in the late afternoon when I am working. I get organic coffee (so there are no chemicals in it) and I sweeten it with Stevia. You could also try dandelion coffee as a substitute.

It contains mold and it is very acidic that it kills the good bacteria in your system. I think that decaf coffee is a no-no because it is very acidic, creating an environment in which yeast thrive.

On the other hand, coffee enemas are ok, as long as you use organic coffee and brew it correctly, which I found out I was doing wrong. When you use it as an enema, the caffeine does not enter your system, but goes directly to stimulating the liver to dump toxins. It also is a great stimulant for the intestines to clean out the junk that is built up.

I have been in the field of candidiasis for a long time and have written many articles about candida. I hope this Why Decaffeinated Coffee Not Allowed for the Anti Yeast Diet article fulfill your expectation, otherwise go ahead grab my recommended report on how to cure candida fast naturally at Fight the Yeast where you can get answers to the rest of your questions.

Read More

Candida Die Off White Tongue To Be Yeast Related – Is It Right?

On this article, Candida Home Remedies blog presents you with article Candida Die Off White Tongue To Be Yeast Related – Is It Right?. No matter what problems you have: candida and diseases, yeast infection symptoms, or anti yeast diet, make sure you visit us often. Check more details below.

My friend has an HMO and have to use certain doctors for her sickness. Her doctor is of no help, anyway. The past month she has been sick, first with ulcers in her throat, and now with symptoms on her lips and tongue. Her lips are red, tingly feeling, and very sore. Her tongue seems swollen and has almost like little tiny sores in spots (it is a little whitish, but not much). Her doctor says there has to be whitish stuff on her lips and tongue for it to be yeast related.

But she has read – even seen pictures on the web – where it is red not white. She finally got him to call in that one time pill for yeast infections and bought Acidolphilis from the health food store. It has only been one day, so she hasnt had any relieve as of yet. She was just wondering if anyone thought she was on the right track. She has been reading all the symptoms of Candida and just felt like why didnt she or her doctor picks up on this sooner, as there is so many similarities to her history.

For your information, you don’t have to have white stuff on the lips for the problem to be yeast related. Ulcers in the mouth/ throat are a symptom of Candida. I am not saying yours is or isn’t. But they are, nevertheless, symptoms of the horrible ‘invasion’. So is a swollen tongue, which makes you feel like you’ve just licked a bed of nettles with no doctor leaves nearby.

Somebody said earlier that often times, we are on our own, as far as our doctor’s advice/ encouragement/ knowledge about Candida is concerned. Read as much as you can about the illegal immigrants, and then read some more.

I wish this article "Candida Die Off White Tongue To Be Yeast Related – Is It Right?" has been informative and meet what you need. If you want to know more details about this issue, or everything related to anti candida diet, I highly suggest that you grab my recommended special report and also get their support on Fight the Yeast website. Make sure you take advantage of their support, that what I found the most important thing you should do.

Read More

Creating a Windows Server 2012 Failover Cluster

Creating a cluster on Windows Server 2012 is easy experience!

After installing the Failover Clustering feature, and validating a configuration, the next step is to create a new cluster. There are some minor changes in the create cluster experience in Windows Server 2012, but it is very similar to creating a cluster in Windows Server 2008 R2.

For details on installing the Failover Clustering feature, see this blog posting: http://blogs.msdn.com/b/clustering/archive/2012/04/06/10291601.aspx

To learn more about validation, see this TechNet article: http://technet.microsoft.com/en-us/library/cc731844(v=ws.10).aspx

You can create a cluster using the Failover Cluster Manager UI, or using PowerShell. Both of these can be installed on Windows Server 2012 or Remote Server Administration Tools (RSAT) for Windows Server 2012.

Creating a Failover Cluster using Failover Cluster Manager

1. Open Failover Cluster Manager - it can be opened from Server Manager using the Tools menu:

2. In the Failover Cluster Manager, choose the “Create Cluster…” action, which can be found in 3 places:

3. The Create Cluster Wizard initializes. Review the information on the Before You Begin screen. Click Next

4. Enter the names of all the servers that will be part of the cluster. Note: More than one node can be specified at a time, using comma separation.

Example: MyServer1, MyServer2, MyServer3

5. If the nodes specified have not been validated, the following page in the wizard will be shown. It’s highly recommended to validate the configuration before you create the cluster. This will help ensure that the servers are connected and configured correctly and that it can be supported by Microsoft:

Read more about Creating a Windows Server 2012 Failover Cluster at blogs.msdn.com

Read More

Trouble setting up more than 4 network adapters in VirtualBox

I've been trying to setup the 8 network adapters that VirtualBox is supposed to support, through the command line. I need them as bridged networks (because I use them to forward ports from a server installed in the VM).

So, the commands I've used go like this:

VBoxManage modifyvm  --nic5 bridged
VBoxManage modifyvm  --bridgeadapter5 "Realtek PCIe GBE Family Controller"
VBoxManage modifyvm  --nicpromisc5 allow-all

And so on for the other 3. I set them up as bridged, set the adapter name to my host network adapter name, and set promiscuous mode to allow all. They use the adapter PCnet-FAST III (Am79C973). Checking with the showvminfo command, I get this:

C:\Program Files>cd Oracle

C:\Program Files\Oracle>cd VirtualBox

C:\Program Files\Oracle\VirtualBox>VBoxManage showvminfo XP2
Name:            XP2
Groups:          /
Guest OS:        Windows XP (32 bit)
UUID:            b53a67f9-7fba-43a0-9f2c-a13e9f1249ab
Config file:     C:\Users\MyUserName\VirtualBox VMs\XP2\XP2.vbox
Snapshot folder: C:\Users\MyUserName\VirtualBox VMs\XP2\Snapshots
Log folder:      C:\Users\MyUserName\VirtualBox VMs\XP2\Logs
Hardware UUID:   b53a67f9-7fba-43a0-9f2c-a13e9f1249ab
Memory size:     256MB
Page Fusion:     off
VRAM size:       18MB
CPU exec cap:    40%
HPET:            off
Chipset:         piix3
Firmware:        BIOS
Number of CPUs:  1
PAE:             off
Long Mode:       off
Synthetic CPU:   off
CPUID overrides: None
Boot menu mode:  message and menu
Boot Device (1): Floppy
Boot Device (2): DVD
Boot Device (3): HardDisk
Boot Device (4): Not Assigned
ACPI:            on
IOAPIC:          off
Time offset:     0ms
RTC:             local time
Hardw. virt.ext: on
Nested Paging:   on
Large Pages:     on
VT-x VPID:       on
VT-x unr. exec.: on
State:           running (since 2014-04-30T11:22:59.596000000)
Monitor count:   1
3D Acceleration: off
2D Video Acceleration: off
Teleporter Enabled: off
Teleporter Port: 0
Teleporter Address:
Teleporter Password:
Tracing Enabled: off
Allow Tracing to Access VM: off
Tracing Configuration:
Autostart Enabled: off
Autostart Delay: 0
Default Frontend:
Storage Controller Name (0):            IDE
Storage Controller Type (0):            PIIX4
Storage Controller Instance Number (0): 0
Storage Controller Max Port Count (0):  2
Storage Controller Port Count (0):      2
Storage Controller Bootable (0):        on
IDE (0, 0): E:\Programas\VirtualBox\Guindous XP.vdi (UUID: 70549b55-f222-4b47-be
78-52ba486e880d)
IDE (1, 0): Empty
NIC 1:           MAC: 08002780847C, Attachment: Bridged Interface 'Realtek PCIe
GBE Family Controller', Cable connected: on, Trace: off (file: none), Type: Am79
C973, Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy: allow-all, Bandw
idth group: none
NIC 2:           MAC: 080027B2180A, Attachment: Bridged Interface 'Realtek PCIe
GBE Family Controller', Cable connected: on, Trace: off (file: none), Type: Am79
C973, Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy: allow-all, Bandw
idth group: none
NIC 3:           MAC: 080027803511, Attachment: Bridged Interface 'Realtek PCIe
GBE Family Controller', Cable connected: on, Trace: off (file: none), Type: Am79
C973, Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy: allow-all, Bandw
idth group: none
NIC 4:           MAC: 080027DE9E9D, Attachment: Bridged Interface 'Realtek PCIe
GBE Family Controller', Cable connected: on, Trace: off (file: none), Type: Am79
C973, Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy: allow-all, Bandw
idth group: none
NIC 5:           MAC: 080027918504, Attachment: Bridged Interface 'Realtek PCIe
GBE Family Controller', Cable connected: on, Trace: off (file: none), Type: Am79
C973, Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy: allow-all, Bandw
idth group: none
NIC 6:           MAC: 08002719AAFC, Attachment: Bridged Interface 'Realtek PCIe
GBE Family Controller', Cable connected: off, Trace: off (file: none), Type: Am7
9C973, Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy: allow-all, Band
width group: none
NIC 7:           MAC: 08002739E2E1, Attachment: Bridged Interface 'Realtek PCIe
GBE Family Controller', Cable connected: off, Trace: off (file: none), Type: Am7
9C973, Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy: allow-all, Band
width group: none
NIC 8:           MAC: 0800277BD34B, Attachment: Bridged Interface 'Realtek PCIe
GBE Family Controller', Cable connected: off, Trace: off (file: none), Type: Am7
9C973, Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy: allow-all, Band
width group: none
Pointing Device: USB Tablet
Keyboard Device: PS/2 Keyboard
UART 1:          disabled
UART 2:          disabled
LPT 1:           disabled
LPT 2:           disabled
Audio:           enabled (Driver: DSOUND, Controller: AC97)
Clipboard Mode:  Bidirectional
Drag'n'drop Mode: Bidirectional
Session type:    GUI/Qt
Video mode:      1920x1002x16 at 0,0
VRDE:            disabled
USB:             enabled
EHCI:            disabled

USB Device Filters:



Available remote USB devices:



Currently Attached USB Devices:



Bandwidth groups:  

Shared folders:  

VRDE Connection:    not active
Clients so far:     0

Video capturing:    not active
Capture screens:    0
Capture file:       C:\Users\MyUserName\VirtualBox VMs\XP2\XP2.webm
Capture dimensions: 1024x768
Capture rate:       512 kbps
Capture FPS:        25

Guest:

Configured memory balloon size:      0 MB
OS type:                             WindowsXP
Additions run level:                 3
Additions version:                   4.1.10 r76836


Guest Facilities:

Facility "VirtualBox Base Driver": active/running (last update: 2014/04/30 11:23
:09 UTC)
Facility "VirtualBox System Service": active/running (last update: 2014/04/30 11
:23:15 UTC)
Facility "VirtualBox Desktop Integration": active/running (last update: 2014/04/
30 11:23:25 UTC)
Facility "Seamless Mode": active/running (last update: 2014/04/30 11:23:09 UTC)
Facility "Graphics Mode": active/running (last update: 2014/04/30 11:23:09 UTC)

So all of the adapters have the exact same configuration, except for the MAC addresses, which is all right.

But on opening the VM (which uses Windows XP), it seems unable to manage more than four network adapters at once. Whatever four adapters were the last to connect show an error icon and don't work.

So at this point, I don't know what else am I supposed to do. I don't find any info saying I should touch any more settings in VirtualBox, and I'm unsure if this is a VBox error or a Windows XP error.

I failed to find any official reference to a maximum number of nics supported by XP. However, I found this thread, where a user claims:

I've seen as many as eight working as a result of VMWare Workstation being installed (they were virtual NICs). I expect it depends on your selected hardware more than anything.

So technically what I'm trying should be viable.

I played around with the virtual hardware type a little bit, but they just wouldn't work.

Finally it works correctly in a Windows 7 guest, probably because it uses a different virtualized network card (Intel PRO/1000 MT Desktop).

Read More

How To Fix Msvcr110.dll Not Found or Missing

Msvcr110.dll Error Messages

There are several different ways that msvcr110.dll errors can show up on your computer. Here are some of the more common ways that you might see msvcr110.dll errors:

• "Msvcr110.dll Not Found"
• "This application failed to start because msvcr110.dll was not found. Re-installing the application may fix this problem."
• "Cannot find [PATH]\msvcr110.dll"
• "The file msvcr110.dll is missing."
• "Cannot start [APPLICATION]. A required component is missing: msvcr110.dll. Please install [APPLICATION] again."

Msvcr110.dll error messages might appear while using or installing certain programs, when Windows starts or shuts down, or maybe even during a Windows installation.

The context of the msvcr110.dll error is an important piece of information that will be helpful while solving the problem.

Cause of Msvcr110.dll Errors

Msvcr110.dll errors are caused by situations that lead to the removal or corruption of the msvcr110 DLL file.

In some cases, msvcr110.dll errors could indicate a registry problem, a virus or malware issue or even a hardware failure.

Don't Want to Fix This Yourself?

If you're interested in fixing this problem yourself, continue with the troubleshooting in the next section.

Otherwise, see How Do I Get My Computer Fixed? for a full list of your support options, plus help with everything along the way like figuring out repair costs, getting your files off, choosing a repair service, and a whole lot more.

How To Fix Msvcr110.dll Errors

Important: Do not download msvcr110.dll from a "DLL download" website. There are many reasons why downloading a DLL file is a bad idea. If you need a copy of msvcr110.dll, it's best to obtain it from its original, legitimate source.

Note: Start Windows in Safe Mode to complete any of the following steps if you're unable to access Windows normally due to the msvcr110.dll error.

1. Download the Visual C++ Redistributable for Visual Studio 2012 Update 4 package and run it. This will replace/restore the msvcr110.dll with the most recent copy provided by Microsoft.

You're given several download options from Microsoft for this update, based on the version of Windows you have installed - x86 (32-bit) or x64 (64-bit). See Am I Running a 32-bit or 64-bit Version of Windows? for help if you're not sure what to choose.

Important: Try your best to complete this step. Applying this update is almost always the solution to msvcr110.dll errors.

2. Restore msvcr110.dll from the Recycle Bin. The easiest possible cause of a "missing" msvcr110.dll file is that you've mistakenly deleted it.

If you suspect that you've accidentally deleted msvcr110.dll but you've already emptied the Recycle Bin, you may be able to recover msvcr110.dll with a free file recovery program.

Important: Recovering a deleted copy of msvcr110.dll with a file recovery program is a smart idea only if you're confident you've deleted the file yourself and that it was working properly before you did that.

3. Run a virus/malware scan of your entire system. Some msvcr110.dll errors could be related to a virus or other malware infection on your computer that has damaged the DLL file. It's even possible that the msvcr110.dll error you're seeing is related to a hostile program that's masquerading as the file.

4. Use System Restore to undo recent system changes. If you suspect that the msvcr110.dll error was caused by a change made to an important file or configuration, a System Restore could solve the problem.

5. Reinstall the program that's producing the msvcr110.dll error. If the msvcr110.dll error occurs when you use a particular program, reinstalling that program might help.

6. Install any available Windows updates. Many service packs and other patches replace or update some of the hundreds of Microsoft distributed DLL files on your computer. The msvcr110.dll file could be included in one of those updates.

7. Test your memory and then test your hard drive. I've left the majority of hardware troubleshooting to the last step, but your computer's memory and hard drive are easy to test and are the most likely components that might cause msvcr110.dll errors as they fail.

If the hardware fails any of your tests, replace the memory or replace the hard drive as soon as possible.

8. Repair your installation of Windows. If the individual msvcr110.dll file troubleshooting advice above is unsuccessful, performing a startup repair or repair installation should restore all Windows DLL files to their working versions.

9. Use a free registry cleaner to repair msvcr110.dll related issues in the registry. A free registry cleaner program may be able to help by removing invalid msvcr110.dll registry entries that might be causing the DLL error.

Important: I rarely recommend the use of registry cleaners. I've included the option here as a "last resort" attempt before the destructive step coming up next.

10. Perform a clean installation of Windows. A clean install of Windows will erase everything from the hard drive and install a fresh copy of Windows. If none of the steps above correct the msvcr110.dll error, this should be your next course of action.

Important: All the information on your hard drive will be erased during a clean install. Make sure you've made the best attempt possible to fix the msvcr110.dll error using a troubleshooting step prior to this one.

11. Troubleshoot for a hardware problem if any msvcr110.dll errors persist. After a clean install of Windows, your DLL problem can only be hardware related.

Applies To

The msvcr110.dll error message could apply to any program or system that might utilize the file on any of Microsoft's operating systems including Windows 8, Windows 7, Windows Vista, Windows XP, and Windows 2000.

Read More