Showing posts sorted by relevance for query bm622i. Sort by date Show all posts
Showing posts sorted by relevance for query bm622i. Sort by date Show all posts

Mar 22, 2013

Huawei BM622i MAC Changer version 2011

Huawei Echolife BM622i 2011 Version is the predecessor of BM622i 2010 Version. Unlike the previous version, the firmware of BM622i 2011 is more secured, the telnet port is close however can be open by triggering using the terminal upgrader and the telnet / WebUI user account and password is preset or fixed.

How to Change the MAC Address of Huawei Echolife BM622i 2011 Version WiMAX Modem?

The following step by step guide is the proper method in changing the MAC address of BM622i 2011 version.
  1. If you are using Windows Vista 7 or 8, you should turn on or enable first the Telnet Client in the Control Panel/Program and Features/Turn Windows Features on or Off.
  2. Then, download one of the following terminal upgrader (such software will be used to trigger the modem to open its telnet port).
  3. BM622i_V100R001PHLC08B029PST03 - BM622i WiMAX Firmware Terminal Upgrader Version 29
    BM622i_V100R001PHLC08B030PST03 - BM622i WiMAX Firmware Terminal Upgrader Version 30
  4. Connect the BM622i modem to the computer. Wait for a few minutes, until the modem is fully detected by the operating system.
  5. Unzip and execute the downloaded file. Wait for 30 seconds or more to allow the software to run in the background. Don't upgrade just leave the program being active in the desktop. If windows security alert will display, click "Allow access" button.


  6. In this instance, the telnet port of the BM622i modem is now open. Open Run dialog window. Type telnet 192.168.254.1 just like below then click OK button or press Enter.


  7. In the telnet command line interface, type or paste Firefly in the Login line and press Enter.
  8. In the password line, type or paste $P4mb1h1r4N4m4nT0!! . The password characters will not display in the line. Just continue typing or pasting it right. Then press Enter.
  9. In the ATP> line, type xiugai macdizhi and the new MAC address just like the image below, and press Enter. (note: the MAC Address Generators of this site had already added the prefix command on its options. You can easily copy the command plus the selected MAC address from the generators.)
  10. Then, type diag restore default to take effect the changes and press Enter. After of that, the modem will reboot. You should wait for 3 to 4 minutes until the telnet prompt displays "the connection to the host is lost". Then, you can now close the telnet prompt and the terminal upgrader window.


  11. Now go to the WebUI of the modem to view if the changes had take effect. Open a browser, type 192.168.254.1 in the address bar, then press Enter. In the WebUI type user in the Username and 0SlO051O in the Password boxes.
Following screenshots were taken before and after the changing of MAC address.


That's it. The process is fully tested by the author. However, use at your own risk and the author has no liability for any damage that may incur during your use of this tutorial.

Apr 14, 2013

Huawei BM622i MAC Change Package Date 2010

This is another How-To change the MAC address of Huawei Echolife BM622i 4G WiMAX CPE broadband modem wireless router firmware date package 2010. This tricks is a different approach as the previous post to Huawei BM622i MAC Change Package Date 2011. Although this is being done also thru CLI via telnet or putty client with specific command.


The above is a snapshot of Huawei Echolife BM622i 4G WiMAX CPE broadband modem wireless router date package 2010 firmware from Globe Telecom Philippines one of 4G ISP Telcos in the country.

To begin with click the Start button of your Windows machine make sure you enable your telnet client from your Conrol Panel>Promgram and Features because on 32/64bit Windows7 this is disable by default, Windows XP don't have the issue about it. Putty is an alternative if you want to be handy.

On Search Programs and Files type telnet 192.168.254.1 then press Enter

Or simply use putty


Telnet Command
Login: wimax
Password:wimax820
ATP>diag set macaddr 40:4D:8E:26:A1:7C

set Lan mac address success
Lan mac address updated 40:4D:8E:26:A1:7D
set Lan Mac address Sucess
Wan mac address updated 40:4D:8E:26:A1:7C

ATP>diag reboot
This must be the output of your telnet command line interface (cli) or putty screen.

The Huawei Echolife BM622i 4G WiMAX CPE broadband modem wireless router will then now reboot just wait for few seconds.

Open your fave browser on the address bar type http://192.168.254.1 login as admin account used any password generator with your MAC address you used in telnet cli as in my case I have used  40:4D:8E:26:A1:7C MAC address and yours might be differ.


Your WAN and LAN MAC addresses would  appear similar to the screenshot above, once you have login as admin you must be seeing this. To verify that everything will works, while logged in as admin account navigate the BM622i 4G WiMAX CPE interface on the left corner there is WiMAX Menu click Security Sub-menu we will confirm if the Profile Security Setting is in place such NAI, User ID and the User Password fail to do this even a valid MAC address will not let you connect to the ISP network.


If happen to you such as the screenshot above then you will be in trouble (this will keep on connecting only), as in my case I have used 40:4D:8E:26:A1:7C as my valid MAC address so will then input manually the NAI, User ID and the User Password just like the snapshot below.


Here the sample of NAI, User ID and User Password

NAI 404D8E26A17C@globelines.com.ph
User ID 2008t2EIHdNtQEMD

In my case once I set from telnet command line interface ATP>diag set macaddr 40:4D:8E:26:A1:7C it will automatically changed the NAI, User ID and the User Password.

Feb 14, 2013

Huawei BM622i Change MAC via Upgrade Telnet


Here's another trick to change the MAC Address of your Huawei BM622i 4G WiMAX CPE wireless broadband modem using BM622i V100R001PHLC08B029PST03.exe dis-upgrading the firmware 2011 via telnet command line interface (cli).


First you have to download here the Globe WiMAX 4G wireless broadband CPE modem upgrade utility filename for Huawei BM622i V100R001PHLC08B029PST03.EXE and run it, as you can see the screenshot above.

Just leave it open as it on the screenshot above, open up telnet client if you have Putty utility much better input 192.168.254.1 at port 23 and click open.. But if you don't have on your Windows 7 you must enable it on Control Panel  then Program and Features where telnet is located. Windows XP telnet client is enable by default just Click Start => Run then type telnet 192.168.254.1 command hit enter it will prompt you a window lead to command line interface.

You may now login using the simple steps below:

LOGIN: Firefly

PASSWORD: $P4mb1h1r4N4m4nT0!!

Then press enter

ATP>xiugai macdizhi XX:XX:XX:XX:XX:XX
ATP>diag restore default

Wait, now the Huawei BM622i WiMAX 4G Wireless broadband CPE modem will reboot. Open any your favorite browser on address bar type http://192.168.254.1 with the username and password user, use Huawei WiMAX password generator to generate the admin password to be able to login as admin privilege account.


Congratulation, you may now able to change your Huawei BM622i WiMAX 4G CPE wireless broadband modem.

Feb 18, 2013

Huawei WiMAX Password Generator

Recently, Globe Telecom one of the major wireless ISP in the Philippines updated all their Huawei devices 4G WiMAX CPE remotely using TR069  that is connected to their network and this will enhance some features to the wireless modem especially firmware version V100R001PHLC08B025.

The delima with the new firmware 2011 updates is that the old tricks to locate the admin password for the subscriber to gain access to the advanced features on the CPE device such as Huawei BM622i will no longer co-exist.

This how-to is an alternative way to generate the admin password in order to login as admin account with the privilege unchanged of the 4G WiMAX CPE. Things you need are:

1. Download this file Huawei WiMAX BM622i password generator here
2. Extract the downloaded file using WINRAR, 7zip, or compatible .rar extractor
3. Open/Click this file 'ExcelAccess.exe' from the extracted folder.


You can check this previous post on how to get the MAC address on Globe Broadband 4G WiMAX Huawei Bm622i using default username and password.

4. Now you will have to get you MAC address under your Huawei BM622i modem (under the bar code you will see MAC: AA11BB22CC33) something like that.

5. Enter your MAC here


6. Click 'GENERATE' button to generate your admin password and will show something like this below


7. Now copy/paste that in your notepad (you can use ctrl-c & ctrl-v to copy paste), so you can remember easily.

8. On your web browser got to URL: http://192.168.254.1/globe and then enter username: admin and your generated password.


9. After a successful login, you will now be able to fully administer your BM622i 4G modem, and will be able to open other special tabs.


Hope this helps.... just leave a comment if you appreciate my post.

I got this from another forum site, and wanted to share my own experiment, and so I made my own procedures. Enjoy!

Feb 16, 2013

Huawei BM622i and BM622m Comparison


If you take a look the physical appearance of screenshot above it looks like no differences, from left is Huawei model BM622m while on the right side is model BM622i. From the rear both have same ports such as the RJ45 LAN, POTS for VoIP Telephone, SMA connector for external antenna, likewise the DC power supply and also the pin hole for the reset button are identical.


Looking at the front view there has no big change, from down indicator is POTS LEDs for VoIP followed by LAN, Power and the WiMAX five lit signal strength status.


The internal side of Huawei model BM622m has really big difference with regards to board and the layout, flash memory is also different to the BM622i CPE. As you can see from above, below is the BM622i internal boards and layout.


It only proves that Huawei BM622m and BM622i are far not identical to each other with regards to their hardware such as CPU, Flash Memory including the WAN chips, maybe because old version of  Huawei BM622 has very poor in terms of security issue.



Mar 30, 2013

Huawei BM622i MAC Change Package Date 2011

Another tricks and tips on how-to DIY (do-it-yourself) Huawei BM622i package date 2011 access admin privilege gui (graphical user interface) setting and MAC address manual or automatic configuration.

First of course open any of your favorite web browser on the address bar type http://192.168.254.1, be sure your PC is in the same Subnet IP address otherwise if the DHCP of the Huawei BM622i  fail you will not see the login page and you should set it manually.


The Huawei Echolife model BM622i 4G WiMAX wireless modem router firmware package dated 2011 is more secured than the previous old 2010 firmware and it has some differences such as the Username and Password. On 2010 firmware the default Username and Password is "user" where as for 2011 is "0SlO051O".


Now, we are going to open the upgrade utility software from Telco wireless broadband internet service broadband so that the telnet port 23 of the Huawei BM622 will be open or enable during this time of processing only.

Next, on the PC we are going to open telnet utility just click Start>Run then type telnet 192.168.254.1 and press Enter. Once the telnet utility is open you may login with the following:

Username: Firefly
Password: $P4mb1h1r4N4m4nT0!!


Then, just follow this simple step copy and paste to avoid error

ATP>xiugai serialnum 500807778001023836 

This will be our Master Serial that we are going to be use to be able to gain the Admin privilege setting, a screenshot above for your reference.

Next is DIY on how-to manually change the MAC address.

ATP> xiugai macdizhi 00:25:68:9C:45:2A

Then,

ATP>diag reboot

Note: On this part we are going to use the command "diag restore default"

After the Huawei BM622i reboot type http://192.168.254.1 on the address bar web browser to login using the "admin" account with password "FG8S_9Sc16tnklTPjn1wfA" we have just generated from the previous MAC address 00:25:68:9C:45:2A from password generator.


As you can see from the screenshot above we are now able to login to the admin privilege setting and we may now able to configure it what we desire to the 4G WiMAX wireless broadband modem router.


No more config download and upload on the interface.

For educational purposes to fully test this tips and tricks procedures below may have to be followed:

1. You must have a valid or working MAC address just barrow from friends/neighbor/relatives.

2. You can use Wimaxtool by SyntaxError or any PassGen similar to this function.

3. Login using the Master Password

4. Upon successfully login Wimax>Security

5. On NAI here we will be placing our valid or working MAC address make sure the pattern is correct.

6. On User ID and the User Password we be placing the generated password of the working MAC address.

7. Click Apply.

8 .Change again the MAC address with the working MAC by using the software utility for upgrade to open the telnet of the Huawei BM622.

ATP> xiugai macdizhi XX:XX:XX:XX:XX:XX (replace all xx with the working or valid MAC)

ATP>diag reboot

Note: We are not going to use the command "diag restore default" so the it will not reset our setting on the security settings.

9. Don't forget to change the serial.

Script for Changing Mac and Serial. Copy to notepad and save as .vbs or change the file name from .txt to . vbs
Set cloner = CreateObject("WScript.Shell")
cloner.run"cmd"
WScript.Sleep 2000

cloner.SendKeys"telnet 192.168.254.1"
cloner.SendKeys("{Enter}")
WScript.Sleep 2000

cloner.SendKeys"Firefly"
cloner.SendKeys("{Enter}")
WScript.Sleep 2000

cloner.SendKeys"$P4mb1h1r4N4m4nT0!!"
cloner.SendKeys("{Enter}")
WScript.Sleep 2000

cloner.SendKeys"xiugai serialnum 500807778001023836"
cloner.SendKeys("{Enter}")
WScript.Sleep 2000

cloner.SendKeys"xiugai macdizhi 00:25:68:9C:45:2A"
cloner.SendKeys("{Enter}")
WScript.Sleep 7000

cloner.SendKeys"diag reboot"
cloner.SendKeys("{Enter}")
WScript.Sleep 5000

cloner.SendKeys("{Enter}")
WScript.Sleep 30000

cloner.SendKeys"exit"
cloner.SendKeys("{Enter}")
WScript.Sleep 45000

Oct 29, 2012

Huawei BM622i MAC Changer via SPI Flasher

This tutorial for Wimax BM622i modem you need a know how in hex and electronics, you need also a hot air tools. Change MAC using LPT Flasher and dump files and SPI Program, There are humor that Bm622i is similar to xbox 360.

STEP BY STEP HOW TO USED SPI PROGRAM Update CLICK HERE


This is the WAN IC "Spansion 25FL128"



To protect the Spansion 25FL128

Try This easy to remove by debug





Create a Homemade Flasher

Here is the SPI circuit You can buy parts in electronics shop like ALEXAN you won't spend 200 pesos. Some trouble with try 2 use 74hc244 na IC,, ground pin#1&10 and remove pullup resistor. To learn about LPT Flasher asked Google




Connect your Spansion 25FL128 Chip on the flasher, PIN is the dotted.


Connect your Flasher on LPT (Parallel Port)

New PCs motherboard don't have parallel port support. Alternative, I find CD RKING PCI Parallel Card for 280 pesos.


DOWNLOAD SPI FLASHER SOFTWARE

Run SPI program Calibrate then Select Device family Spansion

NOTE: Windows 7 must change to XP this incompatibility issue you may have prompted with BLUE SCREE.


Click ID to test in your Flasher read your IC


Read your Device You can save your dump file here


You need to find your MAC WAN in offset here you must know how to use HEX and chance value.
The finished PCB in action, just remember to erase the chip first before re-programming, it works best that way...


DOWNLOAD HEX WORKSHOP FOR EDITING HEX
Find your MAC and EDIT




Supported chips (and possibly others):

AMIC:
  • A25L05PU/PT (64kB)
  • A25L10PU/PT (128kB)
  • A25L20PU/PT (256kB)
  • A25L40PU/PT (512kB)
  • A25L80PU/PT (1MB)
  • A25L16PU/PT (2MB)
  • A25L32PU/PT (4MB)
  • A25L64PU/PT (8MB)
  • A25L512 (64kB)
  • A25L010 (128kB)
  • A25L020 (256kB)
  • A25L040 (512kB)
  • A25L080 (1MB)
Atmel:
  • AT26DF041 (512kB)
  • AT26DF081A (1MB)
  • AT26DF161A (2MB)
  • AT26DF321 (4MB)
EON:
  • EN25P16 (2MB)
  • EN25P32 (4MB)
  • EN25P64 (8MB)
  • EN25P128 (16MB)
  • EN25F16 (2MB)
  • EN25F32 (4MB)
  • EN25F64 (8MB)
  • EN25F128 (16MB)
Macronix:
  • MX25L1005 (128kB)
  • MX25L2005 (256kB)
  • MX25L4005 (512kB)
  • MX25L8005 (1MB)
  • MX25L1605 (2MB)
  • MX25L3205 (4MB)
  • MX25L6405 (8MB)
Spansion:
  • S25FL004A (512kB)
  • S25FL008A (1MB)
  • S25FL016A (2MB)
  • S25FL032A (4MB)
  • S25FL064A (8MB)
  • S25FL128P (16MB)
SST:
  • SST25VF010 (128kB)
  • SST25VF020 (256kB)
  • SST25VF040 (512kB)
  • SST25VF080 (1MB)
  • SST25VF016 (2MB)
  • SST25VF032 (4MB)
  • SST25VF064 (8MB)
  • SST25VF128 (16MB)
  • SST26VF016 (2MB)
  • SST26VF032 (4MB)
  • SST26VF064 (8MB)
  • ST Microelectronic:
  • M25P10 (128kB)
  • M25P20 (256kB)
  • M25P40 (512kB)
  • M25P80 (1MB)
  • M25P16 (2MB)
  • M25P32 (4MB)
  • M25P64 (8MB)
  • M25P128 (16MB)
Winbond:
  • W25X10 (128kB)
  • W25X20 (256kB)
  • W25X40 (512kB)
  • W25X80 (1MB)
  • W25X16 (2MB)
  • W25X32 (4MB)
  • W25X64 (8MB)

UPDATE!! Flasher Version

This one no need to remove the Spansion chip


A Ultra Fast USB flasher!!


LPT Simple version


8x or more (thin) wires. The chip had 8 pins after all.
- 8x pins (taken from unused LPT cable)
- 1x 3V CR2302 battery
- 1x 1000uF capacitor
- 8x 100ohms resistor (Use appropriate value - depends on your LPT port output impedance and wiring parameters)


Nadar Gator Version
added a voltage regulator to power it directly from USB port, a switch and some LED indicators .. the extra 3 pin white-connector you see is to get +5VDC & +3.3VDC directly out (optional)




Darwin bagsik version!!


UPDATE KASAMIKOS Flasher






Professional Quality USB SPI Programmer with SOIC8 Adapter!



Read more Baklas kabit : http://www.symbianize.com/showthread.php?t=857495

Updated USB SPI Programer Software: Download USBSPI

cadsoft.eagle.professional.v6.1.0
#If you want to buy SPI Flasher Ready to USED..

Check kasamiko USB type thread http://www.symbianize.com/showthread.php?t=859776

Check SPIflash LPT type thread http://www.symbianize.com/showthread.php?t=877589

FREE DUMP FILE: 622 and 626

IF you have any dump file there like 2010 share it here lets help each other.
working copy ng bm622 wan data

Download Now

http://www.mediafire.com/?qjj15zcmj1sl4ak

Download bm622i 2011 click here

Download Bm622i 2010 click here